GPS tracker Skypatrol SP6824 | Integrated with Wialon

Features Skypatrol SP6824:

4G/LTE
Blackbox

Supported in Wialon:

Communication via TCP
Communication via UDP

The following data should also be added to Skypatrol SP6824 unit properties section of Wialon GPS tracking software :

Device type:	Skypatrol SP6824
Unique ID:	custom

Specify the following parameters in configuration software or configuration Skypatrol SP6824 for use in Wialon Hosting :

Server port:

22780

0 units of Skypatrol SP6824 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
event	The reason the report was generated
product_id	Product ID
gps_status	GPS Status, Bits 6-4: 000: GPS is not locked 001: GPS is locked
hdop	Indication of the quality of the received signal
pwr_ext	Main power, which is typically the voltage of the vehicle battery that powers the device	V
pwr_int	Internal battery voltage for devices that are self-powered or have a backup battery	V
pwr_aux	Auxiliary power, which is the voltage of external secondary power source, such as vehicle running lights	V
pwr_solar	Voltage supplied by Solar panel for devices that support one	V
roaming	Roaming: 0: No roaming or no service 1: Roaming
service_type	Cellular service class: 0: No service 1: CDMA 1x 2: GPRS 3: HSPA 4: LTE-Cat1 5: LTE-M1
mcc	MCC
mnc	MNC
rssi	Qualitive indication of the RF signal strength
gpio1_N	GPIO1
gpio2_N	GPIO2
odometer	Odometer	m
temperature	Temperature measured inside the device	°C
sid	SID
nid	NID
bid	BID
lac	LAC
rnc	RNC
ci	CI
cid	CID
centroid_lat	Centroid Lat
centroid_lon	Centroid Lon
bcx	Frequency band code
chan	Channel number within the frequency band
ppn	Sub-channel
rx	RX
tx	TX
ec	EC
hid	Hardware model and revision of the device
os_main	Revision of the operating system
os_extended	Secondary version of the operating system available on some of the devices
app	Version and revision of the Application
io	Revision of the MCU firmware if applicable
configuration	Version of the Configuration file
file_target	0 = Reserved 1 = Application 4 = User Config 5 = Default Config 6 = Daughter MCU 7 = Peripheral Update
file_status	Status of the file transfer. A ‘0’ indicates a successful file transfer
file_error_code	The reason of the file transfer failure

Parameter name

Description

Units

event

The reason the report was generated

product_id

Product ID

gps_status

GPS Status, Bits 6-4:
000: GPS is not locked
001: GPS is locked

hdop

Indication of the quality of the received signal

pwr_ext