Megastek MT80

Megastek MT80
Forum Discussion

Number of units

2
Online
25
Total
Features Megastek MT80:
  • Blackbox
  • Voice calls
  • Watch (bracelet)
Supported in Wialon:
  • Remote management via GPRS
  • LBS
  • Alarm button
  • Communication via TCP

The following data should also be added to Megastek MT80 unit properties section of Wialon GPS tracking software :

Device type: Megastek MT80
Unique ID: imei

Specify the following parameters in configuration software or configuration Megastek MT80 for use in Wialon Hosting :

Server port: 21340

25 units of Megastek MT80 device type are connected to Wialon Data Center. This represents 0.12% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
bds_sat The number of BDS satellite used to fix
glonass_sat The number of GPS satellite used to fix
hdop Horizontal dilution of precision
gprsf

‘R’ - GPRS data is a real-time data
‘S’ - GPRS data is a stored data

mileage Mileage km
mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell ID
gsm GSM signal strength
photo_heart_rate

Value of photoelectric heart rate.
0 - heart rate can not be detected

bpm
step_num The sum of step number in one day steps
activity_tm Activity time in sleep quality period min
light_sleep_tm Light sleep time in sleep quality period min
deep_sleep_tm Deep sleep time in sleep quality period min
charging_flag

Charging flag:
0 - not charging
1 - charging

belt_status

Belt status:
0 - no belt is connected
1 - first belt is connected
2 - second belt is connected
3 - first and second belts are all connected

battery Battery percent %
event_type

Alert event type:
Restart - Device restart by hardware
PowerOn - Device power on by software
PowerOff - Device power off by software
Sos - SOS emergency alert
Timer - Sending GPRS data by interval
CallForSms - Sending SMS by making a call (only for SMS)
LowBattery - Low battery alert
GeoX(GeoName) In - Going into the geo-fence, ‘X’ is the sequence of geo-fence; GeoName - name user set for geo-fence
GeoX(GeoName) Out - Going out of the geo-fence, ‘X’ is the sequence of geo-fence; GeoName - is the name user set for geo-fence
BeltOn - Belt is connected
BeltOff - Belt is disconnected
LocRequest - Real-time location request
Error - Alert type error

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone