Personal GPS tracker SPOT Gen3 | Integrated with Wialon

Features SPOT Gen3:

Supported in Wialon:

The following data should also be added to SPOT Gen3 unit properties section of Wialon GPS tracking software :

Device type:	SPOT Gen3
Unique ID:	serial

Specify the following parameters in configuration software or configuration SPOT Gen3 for use in Wialon Hosting :

Server port:

20793

23 units of SPOT Gen3 device type are connected to Wialon Data Center. This represents 0.11% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
mode	Field that tells the mode of operation
desc	Description of transfer
error_code	Error code if errors occurred during processing. Error codes start with E- on errors, W- on warnings and I- on informational messages.
error_shortm	Brief Error message if errors occurred during processing
error_longm	Detailed Error message if errors occurred during processing
esn_name	Device ESN name
mes_type	One of the defined message types
mes_detail	Detailed Message
near_town	Nearest town
dist_near_town	Distance to the nearest town
battery_state	Battery state

SPOT Gen3 uses the Globalstar satellite network which provides coverage over most traveled areas of the planet

To get data from terminals please use HTTP protocol and this server address:

Wialon Hosting	Wialon Kit
http://193.193.165.165:20793/	http://193.193.165.169:20793/

Fill out a request form to get started with Wialon

SPOT Gen3