Calamp API

Calamp API
Manufacturer: CalAmp
Forum Discussion

Number of units

0
Online
0
Total

The following data should also be added to Calamp API unit properties section of Wialon GPS tracking software :

Device type: Calamp API
Unique ID: custom

0 units of Calamp API device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
imdirectmessagetype

Integer value for the message type per LMDirect protocol spec

hdop

Horisontal dilution of precision


HDOP value Rating
Description
<1 Ideal Highest possible confidence level to be used for applications demanding the highest possible precision at all times.
1–2 Excellent At this confidence level, positional measurements are considered accurate enough to meet all but the most sensitive applications.
2–5 Good Represents a level that marks the minimum appropriate for making accurate decisions. Positional measurements could be used to make reliable in-route navigation suggestions to the user.
5–10 Moderate Positional measurements could be used for calculations, but the fix quality could still be improved. A more open view of the sky is recommended.
10–20 Fair Represents a low confidence level. Positional measurements should be discarded or used only to indicate a very rough estimate of the current location.
>20 Poor At this level, measurements should be discarded.

twodfix

Two-Dimensional Fix indicates whether the fix is performed in only two dimensions (latitude and longitude) without altitude.

  • 0: false
  • 1: true

predicted

Predicted indicates whether the current information is predicted or calculated

  • 0: false
  • 1: true

lastknown

Last Known indicates whether the current information is the last known data

  • 0: false
  • 1: true

invalidtime

Invalid Time indicates whether the time associated with the device is invalid or erroneous

  • 0: false
  • 1: true

invalidfix

Invalid Fix indicates whether the GPS signal fix is invalid or erroneous

  • 0: false
  • 1: true

historic

Historic indicates whether the data is historical (e.g., provided later)

  • 0: false
  • 1: true

differentiallycorrected

The differentiallycorrected field indicates whether differential correction is applied to improve positioning accuracy.

  • 0: false
  • 1: true

gpsvalidity

GPS Validity indicates whether the current device position is valid

  • 0: false
  • 1: true

voicecallactive

Voice Call Active indicates whether a voice call is active on the device

  • 0: false
  • 1: true

threegnetwork

The threegnetwork field indicates whether the device is connected to a 3G network

  • 0: false
  • 1: true

roaming

Roaming indicates whether the device is in a roaming state

  • 0: false
  • 1: true

networkservice

Network Service indicates whether network service is available

  • 0: false
  • 1: true

dataservice

Data Service indicates whether data transmission service is supported

  • 0: false
  • 1: true

connected

Connected field indicates whether the device or service is connected

  • 0: false
  • 1: true

available

The available field indicates whether the device or service is available

  • 0: false
  • 1: true

fixstatus

Fix Status indicates whether a GPS signal is fixed or not

  • 0: false
  • 1: true

eventtype

Event Type indicates the category or type of event associated with the device

  • PRIOD indicates regular updates or status reports sent by the device at predefined intervals.
  • START signifies the beginning of an activity or movement. It could represent the start of a journey, trip, or any relevant operation.
  • STOP indicates the cessation or end of an activity or movement. It can represent the completion of a journey, trip, or any relevant operation.
  • Moving indicates that the device or tracked entity is in motion. It suggests that the associated vehicle, asset, or object is currently moving.
  • TOWING_START indicates that the tracked object has begun being towed or is being moved by another vehicle or means.

eventcode

Event Code refers to a specific event or state associated with the device

devicename

This field contains the name or description of the device

deviceesn

Unique serial number of the device.

deviceairid

Device Air Interface ID is an identifier used to identify the device in the radio network.

carrier

This field indicates the name or identifier of the mobile carrier associated with the device.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone