| help_me |
SOS button pressed |
|
| low_battery |
Low battery alarm |
|
| ac_alarm |
AC alarm |
|
| acc_alarm |
Acceleration alarm |
|
| door_alarm |
Door alarm |
|
| accident |
Accident alarm |
|
| geo_fence_alarm |
Geofence alarm (stockade) |
|
| sens_alarm |
Sensor alarm |
|
| bon_alarm |
Bonnet alarm |
|
| move_alarm |
Movement alarm |
|
| over_speed |
Over speed alarm |
|
| gps_valid |
F - stands for valid L - for invalid
|
|
| command |
Command/event keyword reported by the device |
|
| battery |
Battery level, coarse flag only (10 = low, 90 = normal); not a real percentage for this device |
|
| ignition |
Ignition on/off |
|
| event |
Event that initiated the message |
|
| shake |
Shake alarm |
|
| power_fail |
External power failure |
|
| fortify |
Fortification alarm |
|
| trigger |
Trigger alarm |
|
| pwr_int |
Internal battery voltage |
Volt |
| rfid |
RFID |
|
| param_1 |
Additional param 1 value |
|
| param_2 |
Additional param 2 value |
|
| text |
Free-form text/alarm message |
|
| sleep_mode |
Sleep mode setting (from status reply) |
|
| motion_report_interval |
Motion report interval setting (from status reply) |
|
| stationary_report_interval |
Stationary report interval setting (from status reply) |
|
| armed |
Armed state (from status reply) |
|
| speeding |
Speeding setting/flag (from status reply) |
|
| time_zone |
Time zone setting (from status reply) |
|
| shock_alarm |
Shock alarm setting (from status reply) |
|
| fuel_power_control |
Fuel power control setting (from status reply) |
|
| ext_power |
External power state (from status reply) |
|
| tamper_alarm |
Tamper alarm setting (from status reply) |
|
| fuel_level_alarm |
Fuel level alarm setting (from status reply) |
|
| low_battery_alarm |
Low battery alarm setting (from status reply) |
|
| num_alarm_msgs |
Number of alarm messages setting (from status reply) |
|
| fuel_tank_capacity |
Fuel tank capacity setting (from status reply) |
|
| device_password |
Device password (from status reply) |
|
| balance_inquiry_method |
Balance inquiry method setting (from status reply) |
|
| smart_angle |
Smart angle setting (from status reply) |
|
| movement_alarm |
Movement alarm setting (from status reply) |
|
| shock_sensor_sens |
Shock sensor sensitivity setting (from status reply) |
|
| geo_fence_radius |
Geofence radius (from status reply) |
|
| mileage |
Mileage (from OBD data) |
|
| obd_ins_fuel |
Instant fuel consumption (from OBD data) |
|
| obd_avg_fuel |
Average fuel consumption (from OBD data) |
|
| obd_dr_time |
Driving time (from OBD data) |
|
| obd_speed |
OBD speed (from OBD data) |
|
| obd_pwr_ld |
Engine power load (from OBD data) |
|
| obd_w_temp |
Water/coolant temperature (from OBD data) |
|
| obd_throttle |
Throttle position (from OBD data) |
|
| obd_eng_speed |
Engine speed / RPM (from OBD data) |
|
| obd_pwr_int |
Internal power voltage (from OBD data) |
|
| obd_dtc1 |
OBD diagnostic trouble code 1 |
|
| obd_dtc2 |
OBD diagnostic trouble code 2 |
|
| obd_dtc3 |
OBD diagnostic trouble code 3 |
|
| obd_dtc4 |
OBD diagnostic trouble code 4 |
|
