Number of units
The following data should also be added to Gryphon PRO unit properties section of Wialon GPS tracking software :
| Device type: | Gryphon PRO |
| Unique ID: | imei |
Specify the following parameters in configuration software or configuration Gryphon PRO for use in Wialon Hosting :
| Server port: | 21596 |
0 units of Gryphon PRO device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.
Below chart represents the dynamic of connections in the last 30 days:
| Parameter name | Description | Units |
|---|---|---|
| accel | Event accelerometer | |
| adcX | Data of the X L input, X - number of input | |
| alaarm_in1 | State of the first alarm inputs | |
| alaarm_in2 | State of the second alarm inputs | |
| balanse | Account balance | |
| device_config | Device configuration | |
| error_cod | Error code devices | |
| flash | Presence of external Flash memory | |
| fuel_dataX | Data of the fuel sensor X, X- number of sensor | |
| fuel_tempX | Temperature of the fuel sensor X, X- number of sensor | °C |
| gps_anten | Status of the GPS antenna | |
| gps_ind | GPS indicator | |
| gsm_cell | Active SIM card | |
| gsm | GSM signal level | |
| imei_f | Modul IMEI | |
| l_inX | Status of the X L input, X - number of input | |
| po_vershin | Firmware version | |
| pwr_ext | Voltage of internal power supply | Volt |
| sequre | The state protection | |
| serv_com | Status command is received from the server | |
| volt_in1 | Voltage on the first analog input | Volt |
| volt_in2 | Voltage on the second analog input | Volt |
