GPS tracker WanWay G19S | Integrated with Wialon

Features WanWay G19S:

Supported in Wialon:

The following data should also be added to WanWay G19S unit properties section of Wialon GPS tracking software :

Device type:	WanWay G19S
Unique ID:	imei

Specify the following parameters in configuration software or configuration WanWay G19S for use in Wialon Hosting :

Server port:

22554

9 units of WanWay G19S device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
gsm	GSM signal strength degree

The file contains a detailed description and specifications for SMS commands.

Fill out a request form to get started with Wialon

WanWay G19S