Topflytech TorchX 100

Topflytech TorchX 100
Forum Discussion

Number of units

51
Online
102
Total
Features Topflytech TorchX 100:
  • 2G
  • 4G/LTE
  • Blackbox
  • BLE enabled
  • WiFi HotSpot
Supported in Wialon:
  • Accelerometer
  • CAN-bus support
  • Remote management via GPRS
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Topflytech TorchX 100 unit properties section of Wialon GPS tracking software :

Device type: Topflytech TorchX 100
Unique ID: imei

Specify the following parameters in configuration software or configuration Topflytech TorchX 100 for use in Wialon Hosting :

Server port: 22616

102 units of Topflytech TorchX 100 device type are connected to Wialon Data Center. This represents 0.14% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
acc_on ACC ON upload interval range 0 ~ 65535; second
acc_off ACC OFF upload interval seconds, 0 ~ 65535
speed_alarm
Bit15 = 0,Unit is KM/H,Bit 15 = 1,unit is Mile/H;
Bit15...Bit0 - speed

angle angle compensation range 0...180 C
distance Distance compensation m
gps_data
Bit7 : 0 - realtime GPS data,1 - history GPS data
Bit6 : 0 - LBS data,1 - GPS data
Bit5 : 0 - GPS is in work mode,1 - GPS is in sleep mode
Bit4..Bit0 - GPS satellite number
gsensor Bit7..Bit4 - sensitivity Bit4..Bit0 - 4 manager statuses
lock_status

Bit7 : 0 - unlock sim card, 1 - lock sim card
Bit6 : 0 - unlock tracker, 1 - lock tracker
Bit5 :
Bit4 : 0 - antitheft off, 1 - antitheft on
Bit3..Bit0 - vibration level

vibr_lvl vibration level (equals to bit3..bit0 of lock_status)
relay
fuel_cons_inst 

Instant Fuel Consumption

real-time measurement of how much fuel your vehicle's engine is consuming at a given moment

ml/h
fuel_cons_acumm

Accumulating Fuel Consumption
refers to a measurement that represents the total volume of fuel consumed by the vehicle over a specific period

ml
drag_alarm

Drag Alarm setting

m
alarm

Alarm Code

inputs

Digital I/O Status
Bit15: external power supply; value=0, external power is connected; value=1, external power is disconnected
Bit14:ACC, value=1 ignition ON; value=0 ignition OFF
Bit13, digital input 2, value=1 AC on; value=0 AC off
Bit12,digital input 3, value=1 AC on; value=0 AC off
Bit11: AIN2DIN 1, value=1 AC on; value=0 AC off
Bit10:AIN2DIN 2 value=1 AC on; value=0 AC off
Bit9:AIN2DIN 3 value=1 AC on; value=0 AC off
Bit8:DIN1(not acc) value=1 AC on; value=0 AC off
Bit7: reserved
Bit6: reserved
Bit5: reserved
Bit4: Indicates whether there is a third-party OBD inserted or not, "0" means no 3rd part OBD, "1" means yes, 3rd part OBD is present.
BIT2:1 indicates normal external power consumption
BIT1:1 Indicates Abnormal External Power
BIT0:1 indicates that ACCDET is not set to 0 or voltage

mileage

Odometer

m
mcc_N

Mobile country code
N - the position in a data raw

mnc_N

Mobile network code
N - position in a data row

lac_N

Location area code
N - position in a data row

cell_id_N

Cellular station code
N - position in a data row

engine_load

Engine load

%
throttle_position

Throttle Position

%
remain_fuel_rate

Remain Fuel

remain_fuel_rate_type

Shows the measurement forremain_fuel_rate
1, the unit is litres (L);
0, the unit is in percentage (%)

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone