GPS Padlock G-508 (New Protocol)

GPS Padlock G-508 (New Protocol)
Forum Discussion

Number of units

0
Online
2
Total
Features GPS Padlock G-508 (New Protocol):
  • 4G/LTE
  • Blackbox
  • BLE enabled
  • E-seal
Supported in Wialon:
  • Communication via TCP

The following data should also be added to GPS Padlock G-508 (New Protocol) unit properties section of Wialon GPS tracking software :

Device type: GPS Padlock G-508 (New Protocol)
Unique ID: serial

Specify the following parameters in configuration software or configuration GPS Padlock G-508 (New Protocol) for use in Wialon Hosting :

Server port: 22462

2 units of GPS Padlock G-508 (New Protocol) device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
status_cmd_[CMD ID]

Status of the command if it was successful.
CMD ID — id of the parameter that was sent via command platform_cmd

odometer

Odometer of the vehicle

mileage

Total mileage of the vehicle

km
fuel_volume

Fuel tank capacity

m^3
tank_oil_volume

Tank oil volume

m^3
load_sens_id_[NUM]

ID of the load [NUM] sensor, up to 4 groups of load sensors

ad_blue_[NUM]

AD Blue value of the [NUM] sensor, corresponding to load_sens_id. Up to 4 groups of sensors

wifi_mac_[NUM]

Wi-fi MAC address of the [NUM] point. When the satellite positioning is invalid, the terminalactively uploads the current WIFI DATA to the platform for auxiliary positioning. The WIFI_MAC information does not exceed 10 groups

wifi_rssi_[NUM]

WiFi signal strength of the [NUM] point. When the satellite positioning is invalid, the terminalactively uploads the current WIFI DATA to the platform for auxiliary positioning. The WIFI_RSSI information does not exceed 10 groups

ble_mac_[NUM]

BLE MAC address of the [NUM] point. When the satellite positioning is invalid, the terminalactively uploads the current BLE DATA to the platform for auxiliary positioning. The BLE_MAC information does not exceed 10 groups

ble_rssi_[NUM]

BLE signal strength of the [NUM] point. When the satellite positioning is invalid, the terminalactively uploads the current BLE DATA to the platform for auxiliary positioning. The BLE_RSSI information does not exceed 10 groups

event_id

ID of the Event

event_type

Event Type:

  • 0x00 — Normal event
  • 0x01 — Alarm Event

slave_id_[NUM]

Lora save lock slave ID of [NUM] lock

slave_battery_[NUM]

Battery percentage of the [NUM] LORA lock

slave_sealed_[NUM]

Seal status of the [NUM] LORA lock.

  • 0X30 — Unseal
  • 0x31 — Seal

slave_phys_state_[NUM]

Physical state of the [NUM] LORA lock

  • 0X31 — Bound
  • 0x32 — Shackle closed
  • 0x33 — Shackle opened
  • 0x34 — Shell opened
  • 0x35 — Communication timeout
  • 0x36 - Shacle/Wire rope is cut;

slave_rssi_[NUM]

Wireless strength of [NUM] LORA lock signal

temp_hum_sens_id_[NUM]

Lora temperature and humidity sensor ID of [NUM] sensor

lora_pwr_int_[NUM]

Internal voltage of the [NUM] LORA sensor.

V
lora_real_tm_temp_[NUM]

Real time temperature of the [NUM] LORA sensor

°C
low_temp_alm_val_[NUM]

Minimum temperature which triggers alarm on [NUM] Lora sensor

°C
overtemp_alm_time_[NUM]

Maximum temperature which triggers alarm on [NUM] Lora sensor

°C
real_tm_overtemp_alm_stat_[NUM]

Continuous over temperature alarm time threshold of the LORA sensor

lora_real_tm_hum_[NUM]

Real time humidity of the [NUM] LORA sensor

%
​ low_hum_alm_val_[NUM]

Minimum humidity which triggers alarm on [NUM] Lora sensor

%
overhum_alm_time_[NUM]

Maximum humidity which triggers alarm on [NUM] Lora sensor

real_tm_overhum_alm_stat_[NUM]

Continuous over humidity alarm time threshold of the LORA sensor

sens_rssi_[NUM]

Signal strength of the [NUM] LORA sensor

keypad_passwd

Keypads unlock dynamic password (with P model support, such as G300P, the device will automatically generate random passwords after unlocking each time)

battery

Battery level

%
pwr_int

Battery voltage

V
csq_signal

Network CSQ Signal

sim_imsi

IMSI Code of the SIM Card. The upload is triggered when the network is reonnected

client_id

Client ID

term_upg_res

Terminal upgrade result: Upgrade result of the current version, for example, 0, G4-360_20220301 Upgrade result: 0 - The upgrade succeeds. 1 - The upgrade fails

hw_vers

Hhardware version information

sf_vers

Software version information

iccid

Terminal ICCID code

gnss_manufacturer

GNSS module manufacturer.

  • 0X01 - 中科微
  • 0x02 — U-BLOX;

bt_name

Bluetooth name of the device itself

bt_mac

Bluetooth MAC address of the chip itself

wifi_mac

Wifi mac address of the chip itself

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone