Iter 155

Iter 155
Manufacturer: iTER
Forum Discussion

Number of units

0
Online
1
Total
Supported in Wialon:
  • Accelerometer
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Iter 155 unit properties section of Wialon GPS tracking software :

Device type: Iter 155
Unique ID: imei

Specify the following parameters in configuration software or configuration Iter 155 for use in Wialon Hosting :

Server port: 22479

1 units of Iter 155 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
seq_num

Package sequence number (starts from 1 after device is rebooted, and
is increased by 1 for every package)

status

A bitwise variable that indicates specific states of the device and validity of data.

  • Bit 0: GPS status 0 = GPS is not fixed, 1 = GPS is fixed
  • Bit 1: Is device designed for car. 0 = Device is not designed for car, 1 = Device is designed for car
  • Bit 2: Car engine status. 0 = Off, 1 = On
  • Bit 3: Is accelerometer supported. 0 = No accelerometer, 1 = Accelerometer is supported
  • Bit 4: Motion-warning status. 0 = Activated, 1 = Deactivated
  • Bit 5: Output control status. 0 = Not have output control, 1 = Output control is supported
  • Bit 6: Output status. 0 = Off 1 = On
  • Bit 7: External charging status. 0 = No external charging, 1 = External charging is supported
  • Bit 8: Device charge status. 0 = Device is not charging, 1 = Device is charging
  • Bit 9: Device activity status. 0 = Device is stationary, 1 = Device is active
  • Bit 10: GPS module status. 0 = GPS module is not running, 1 = GPS module is running
  • Bit 15: DIN0 level. 0 = low, 1 = high

report

Type of report:

  • Value 1: Ignition on
  • Value 2: Ignition off
  • Value 3: DIN changed

warning_type

Type of warning packet:

  • Value 1: External power cut-off
  • Value 2: SOS (Panic)
  • Value 5: Shift warning
  • Value 8: GPS antenna open-circuit (only for the device with external GPS antenna)
  • Value 9: GPS antenna short-circuit (only for the device with external GPS antenna)
  • Value 36: External power reconnected
  • Value 129: Under-speed warning
  • Value 130: Over-speed warning
  • Value 131: In-to-fence warning
  • Value 132: Out-to-fence warning
  • Value 135: External battery low voltage

battery

Battery voltage (in mV)

ain0

analog input port 0 value (in cV)

ain1

analog input port 1 value (in cV)

mileage

Device mileage (in m)

gsm_counter

GSM counter from last GSM command (in min)

gps_counter

GPS counter from last GPS command (in min)

hourmeter

Accumulated time (in seconds) that device identified ignition turned on

instruction_response

Text that contains result of execution of instruction

instruction_type

Type of instruction

instruction_uid

UID of instruction

ps_ver Param-set version
ps_original_size

Param-set original size

ps_compressed_size

Param-set compressed size

ps_check_sum

Param-set checksum

offset

Param-set uploading offset

data

Param-set uploading data

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code

cell_id

Cell ID with RNC

rx_level

Cell signal level

device_language

Device language

  • Value 1: English

timezone

Device timezone

sys_ver

System version

app_ver

Application version

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone