GPS tracker RST-TG100 | Integrated with Wialon

The following data should also be added to RST-TG100 unit properties section of Wialon GPS tracking software :

Device type:	RST-TG100
Unique ID:	custom

Specify the following parameters in configuration software or configuration RST-TG100 for use in Wialon Hosting :

Server port:

21068

286 units of RST-TG100 device type are connected to Wialon Data Center. This represents 0.01% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
msg_type	Type 2
gps_validity	Indicates the validity of the GPS, with value 1 valid position and value 0 Invalid position.
hdop	HD information of the last valid GPS position.
sX_status	Status of the tracker sensors (Part 1) value. Tracker sensors in two bits: 1 = disabled 2 = Activated (violated) 10 = Disabled (restored) 11 = Cut or error Sensor Status 1 - MSB: Bit 0 - Status of sensor 1 Bit 1 - Status of sensor 1 Bit 2 - Status of sensor 2 Bit 3 - Status of sensor 2 Bit 4 - Status of sensor 3 Bit 5 - Status of sensor 3 Bit 6 - Status of sensor 4 Bit 7 - Status of sensor 4
ext_bat_status	Status of external battery (1 = conected, 0 = disconected)
int_bat_status	Status of the internal battery (1 = conected, 0 = disconected)
gps_ant_status	Status of the external GPS antenna (1 = conected, 0 = disconected)
connect_bus_ign	Ignition status (0 = ignition off 1 = ignition on)
k_sX_status	Status of the keyboard sensors value in hexadecimal. 1 = disable 2 = enable (violated) 10 = disable (restored) 11 = Cut or error Bit 0 - Status of keyboard sensor 1 Bit 1 - Status of keyboard sensor 1 Bit 2 - Status of keyboard sensor 2 Bit 3 - Status of keyboard sensor 2 Bit 4 - Status of keyboard sensor 3 Bit 5 - Status of keyboard sensor 3 Bit 6 - Status of keyboard sensor 4 Bit 7 - Status of keyboard sensor 4
actuators_st1	Status of the actuators 1 tracker, value in hexadecimal. Bit 0 - If value is equal to 1, indicates that the tracker is locked Bit 1 - If value is equal to 1, indicates that the this tracker unlocked Bit 2 - If value is equal to 1, indicates that the siren is connected Bit 3 - If value is equal to 1, indicates that the buzzer is off Bit 4 - If value is equal to 1, indicates that the lock is closed (if latch enabled) Bit 5 - If value is equal to 1 indicates that the lock is open (when braking enabled) Bit 6 - If value is equal to 1, indicates that the fifth wheel lock is open (when enabled fifth wheel) Bit 7 - If value is equal to 1, indicates that the fifth wheel lock is closed (enabled when the fifth wheel)
actuators_st2	Status of the tracker actuators 2 value in hexadecimal. Bit 0 - If value is equal to 1, indicates that the flash alert is on Bit 1 - If value is equal to 1, indicates that the flash alert is off Bit 2 - For future use (always 0) Bit 3 - For future use (always 0) Bit 4 - For future use (always 0) Bit 5 - For future use (always 0) Bit 6 - For future use (always 0) Bit 7 - For future use (always 0)
ext_bat_volt	Voltage external battery, vehicle in volts.	V
int_bat_volt	Voltage internal battery, tracker, in volts.	V
connect_bus_odom	Odometer	km
gsm_signal	GSM modem signal level. This value is between 0 (weak) to 31 (strongest signal).
temp	For the temperature sensor, if a value of 0xFF indicates disabled sensor. Value in hexadecimal. If the value other than 0xFF, then the temperature sensor is enabled, in this case following: Bit 0 - temperature value - LSB Bit 1 - Value temperature Bit 2 - Value temperature Bit 3 - Value temperature Bit 4 - Value temperature Bit 5 - Value temperature Bit 6 - temperature value - MSB Bit 7 - Signal - if value of 1 indicates negative value if value of 0 indicates a positive value If the value is equal to 0xFE indicates that the temperature sensor is faulty hardware or not installed any temperature sensor.
seals	Status of the seals of the keyboard tracker sensors value in hexadecimal. MSB: If value 1 = 0 = sealed or unsealed Bit 0 - Sensor 3 keyboard Bit 1 - Sensor keyboard 4 Bit 2 - For future use, always 0 Bit 3 - For future use, always 0 Bit 4 - For future use, always 0 Bit 5 - For future use, always 0 Bit 6 - For future use, always 0 Bit 7 - For future use, always 0 LSB: If value 1 = 0 = sealed or unsealed Bit 0 - 1 Sensor tracker Bit 1 - Sensor 2 crawler Bit 2 - Sensor 3 crawler Bit 3 - Sensor 4 tracker Bit 4 - 5 Sensor tracker Bit 5 - Sensor 6 crawler Bit 6 - keyboard Sensor 1 Bit 7 - Keyboard Sensor 2
crawler_status	Crawler logical status: Value 1 = switched on in ignition mode Value = 2 in ignition off mode Value = 3 in sleep mode Value = 4 in internal battery mode value = 5 in deep sleep mode (post-production) Value = 6 in breach mode Value = 7 in super sleep mode (mobile)
movement_accel	Movement accelerometer (since the accelerometer is enabled) (1 = moving or 0 = stopped)
accel_enabled	Accelerometer enabled (1 = enabled or 0 = disabled)
anti_theft_mode	Much of the Fault Codes
travel_mode	Traveling mode (only when keyboard attached) (1 = 0 = way trip or stop mode)
mixer_status	Mixer status (provided it is properly configured) 000 = Not enabled 001 = Stop mixer 010 = Mixer turning left (unloading) 011 = Mixer turning right (beating the cement) 100 = Mixer cement loading 111 = Invalid State
rain_sensor	Rain sensor (provided it is properly configured) (1 = enabled or disabled = 0)
rem_fw_update	Remote Firmware Update (1 = enabled or disabled = 0)
jammer	Active Jammer and detected (1 = enabled or disabled = 0)
charger_status	Ccharger status of the internal battery 00 = no charger information 01 = loading process 10 = suspended load 11 = finished loading
event_id	Event id (for msg_type = 47)
event_paramX	Event parameters (number and meaning are based on event_id)
connect_bus_power_windows	Power windows
connect_bus_spraying_sections_state	State of the spraying sections	state
connect_bus_motor_load	Motor load	%
connect_bus_battery_charge_state_ev	Charging type an EV
connect_bus_cooling_liquid_temp	Cooling liquid temperature
connect_bus_engine_oil_pressure	Engine oil pressure	kPa
connect_bus_tire_pressure_td	The pressure of the Tire on the head
connect_bus_i2_type	Type of the second input ["Generic", "Hanger spindle", "Locking differential", "Dancer", "Wiper blade on the windscreen", "Resistance", "Violation of a Panel ON", "Default Panel-NF", "Panic-Button"]
connect_bus_fuel_type	The type of the fuel ["Methane", "Ethanol", "Diesel"]
connect_bus_app_volume_rate	The rate of the Volume of the App, for HA
connect_bus_alarm	Alarm
connect_bus_water_in_fuel	The indicator of the Water-In-Fuel sensor: Off, On	state
connect_bus_cotton_platform	Platform cotton state: Down Lower, Rising
connect_bus_i2_value	Value of the second input	V
connect_bus_motor_torque	Motor torque	Nm
connect_bus_battery_health_ev	Battery health (EV)
connect_bus_o2_signal	Signal of the second output ["Disabled", "Digital", "Digital" inverted", "RANGE"]	signal
connect_bus_cane_elevator_treadmill	State of the cane elevator treadmill ["Off", "On"]
connect_bus_motor_torque_percentage	Torque motor percentage	%
connect_bus_water_pump_sprayer	Water pump sprayer state ["Off", "On"]
connect_bus_o2_type	The type of the second output ["Generic", "Lock", "Lock box", "Relay-L15", "Siren"]
connect_bus_fuel_flow	Total fuel flow	(l/h)
connect_bus_passenger_door	Passenger door state (EV)
connect_bus_pump_to_diesel_flow	The flow from the Pump to a Diesel
connect_bus_clutch_pedal	Clutch pedal state
connect_bus_acc_pedal	Accelerator pedal pressure	%
connect_bus_door_passenger	State of the passenger door
connect_bus_air_conditioning_pwr_ev	The power of the Air-Conditioning system (IV)
connect_bus_liquid_release_spray	["Off", "On"]
connect_bus_cane_production	["Off", "On"]
connect_bus_battery_average_savings_ev	Average savings of Battery power (EV)
connect_bus_pto	PTO active
connect_bus_gear	Gear	march
connect_bus_electric_motor_temp_ev	The temperature of the Electric Motor (EV)	°C
connect_bus_fault_codes_amount	Fault codes amount
connect_bus_heater_pwr_ev	The power of the Heater (EV)
connect_bus_msg_type	Message type 00 OK 01 out of range 02 challenge timeout 03 Invalid challenge response 04 Lock activation not enabled on HW 05 CAN communication timeout 06 CAN initialization error 07 CAN encryption error 08 Error in CAN lock/unlock actuation 09 Did not correctly record/execute the procedure 10 Microcontroller flash memory problem 11 Vehicle communication error 12 Seed collection error 13 Key sending error 14 Error reading lock write confirmation 15 Error writing lock 16 Incompatible ECU Software Information/Number 17 Error maintaining communication with the vehicle 18 CAN0 communication not found 19 CAN1A communication not found 20 CAN1B communication not found 21 J1587 communication not found 22 KWP1 communication not found 23 KWP2 communication not found 24 CAN0 and CAN1A communication not found 25 CAN0, CAN1A and CAN1B communication not found 26 CAN1A and CAN1B communication not found 27 CAN0 and J1587 communication not found 28 CAN1A and J1587 communication not found 29 CAN0, CAN1A and J1587 communication not found 30 vehicle turned off 31 moving vehicle 34 KWP error during lock/unlock procedure 35 Backup not available at start of lock/unlock 36 Error reading parameters for blocking 37 Cylinder cutting error 38 Error during KWP seed request 39 Error did not accept KWP key command 40 Vehicle error did not respond to KWP key command 41 Error reading backup information 42 Size error comparing backups 43 Error comparing backups 44 Authentication session error 45 Reentrant function error 46 invalid tracker error 47 timeout error 48 Accelerator pedal pressed error
connect_bus_fuel_level	Fuel Level	%
connect_bus_oil_engine_pressure	The pressure of the engine oil
connect_bus_e_pedal	E-pedal State (EV)
connect_bus_tire_pressure_te	Tire pressure (TE)	Psi
connect_bus_cotton_harvesting_unit	Cotton harvesting state
connect_bus_charging_cable_ev	A Charging cable is Plugged in (EV)
connect_bus_brake_time	Time to brake	s
connect_bus_headlights	The state of the lights
connect_bus_speed_ev	Vehicle speed (EV)
connect_bus_coupler_back	position of the coupler back	%
connect_bus_tire_pressure_de	Tire pressure DE
connect_bus_o2_value	Value of the second output
connect_bus_cotton_packer	Cotton packer state ["Off", "On"]
connect_bus_brake_parking	Brake, Parking
connect_bus_electric_motor_current_ev	Electric motor current (EV)
connect_bus_airbag	Airbag state
connect_bus_arla32_level	ARLA32 level
connect_bus_dtc_present	["No fault", "fault"]
connect_bus_lever	State of the lever ["Down", "Right", "Left"]
connect_bus_rtk_autopilot	State-BASE / Auto-Pilot ["Off", "On"]
connect_bus_eng_on_dur	Duration of engine on
connect_bus_engine_rpm	Revolutions per minute of the engine	rpm
connect_bus_int_resist	Resistance of internal battery	V
connect_bus_hitch_to_front	Position of hitch to the front	%
connect_bus_load_speed	Load speed of the motor
connect_bus_seatbelt_passenger	Seatbelt, Driver ["Not fastened", "Buckled"]
connect_bus_i1_value	Value of the first input
connect_bus_ign_on_duration	Duration of Ignition On
connect_bus_air_temp	Air temperature
connect_bus_intake_air_pressure	Intake air pressure
connect_bus_blink_warning	Blink warning ["Off", "On"]
connect_bus_clutch	Clutch switch ["Moving", "Stationary", "Open", "Closed"]
connect_bus_engine_brake_mode	Engine brake mode: The regulator in slow motion Accelerator Pedal Cruise control Regulatory SYSTEM the Regulator speed Traction Control Transmission ABS Torque-Limiting Lever, high-speed The brake system Gas pedal remote
connect_bus_out_turbo_oil_temp	Oil temperature in turbo	°C
connect_bus_right_rear_door	["Open", "Closed", "Locked"]
connect_bus_charging_type_ev	["Not Loading", "Slow Loading", "Fast Loading"]
connect_bus_o1_type	["Generic", "Lock", "Lock box", "Relay-L15", "Siren"]
connect_bus_battery_life_ev	Battery life (EV)
connect_bus_lambda
connect_bus_time_to_charge_80	The time of 80% charge (EV)	h
connect_bus_seatbelt_driver	State of the driver's seatbelt ["not fastened", "Buckled"]
connect_bus_charging_voltage_ev	Charging voltage type (EV) ["Not loading", "AC", "DC"]	State
connect_bus_eco_mode	Eco-mode state (EV) ["Off", "On"]
connect_bus_intake_manifold_temp	Engine Intake Manifold 1 Temperature
connect_bus_door_driver	State of the driver's door ["Open", "Closed", "Locked"]
connect_bus_primary_air_pressure	Pressure In The Air Reservoir, The Primary
connect_bus_trans_oil_temp	Transmission oil temperature	°C
connect_bus_fuel_temp	Fuel temperature	°C
connect_bus_primary_air_reservoir_pressure	The pressure of the Air in the Reservoir, the Primary
connect_bus_pwr_int	Internal voltage	V
connect_bus_engine_hours	Total engine hours
connect_bus_air_conditioning_temp	The Selected temperature of the Air-Conditioning system	°C
connect_bus_current_battery_capacity_ev	The Current capacity of the Battery (EV)
connect_bus_speed	The speed determined by the tachograph
connect_bus_pwr_int_ev	Interval power voltage
connect_bus_oil_hydraulic_temp	Oil hydraulic temperature
connect_bus_grain_unloading	["Off", "On"]
connect_bus_wiper_blade	Wiper Blade for windshield ["Off", "On"]
connect_bus_trunk	["Open", "Closed", "Locked"]
connect_bus_full_charge_time_ev	Charge time to full (100%) (EV)
connect_bus_payload_ver	Version of the payload like 1.2.3
connect_bus_traction	Traction
connect_bus_left_rear_door	["Open", "Closed", "Locked"]
connect_bus_eng_oil_level	Oil level in engine	%
connect_bus_distance_to_service	Distance to the Service
connect_bus_battery_output_pwr_ev	Battery voltage (EV)
connect_bus_i1_signal	Signal of the first input ["Disabled", "Digital", "Analog"]
connect_bus_i2_signal	Signal of the second input ["Disabled", "Digital", "Analog"]
connect_bus_tire_pressure_dd	Tire pressure (DD)	Psi
connect_bus_o1_value	Value of output 1	V
connect_bus_clutch_time	Time to clutch
connect_bus_engine_brake	Engine brake state ["Off", "On"]
connect_bus_load_code	Load code
connect_bus_turbo_pressure	Turbo pressure	Nm
connect_bus_angle	The angle of the steering Wheel	°
connect_bus_tank_ethanol_percentage	Percentage of Ethanol in the Tank
connect_bus_maximum_battery_capacity_ev	The Maximum capacity of the Battery (EV)
connect_bus_i1_type	Type of the input 1 ["Generic", "Hanger spindle", "Locking differential", "Dancer", "Wiper blade on the windscreen", "Resistance", "Violation of a Panel ON", "Default Panel-NF", "Panic-Button"]
connect_bus_instant_savings	Instant savings
connect_bus_odometer	Hour meter	km
connect_bus_nitrogen_oxides_nox	Nitrogen oxides (Nox)	ppm
connect_bus_average_savings	Average savings
connect_bus_court_pressure	Court pressure
connect_bus_primary_cane_extractor	State of the cane extractor
connect_bus_total_fuel	Total fuel used	l
connect_bus_battery_temp_ev	Temperature of the battery (EV)
connect_bus_air_conditioning	["Off", "On"]
connect_bus_o2_percentage	O2 Percentage
connect_bus_eng_oil_temp	Engine oil temperature
connect_bus_available_regeneration_pwr_ev	Available regeneration power (EV)
connect_bus_the_modes_of_the_engine_brake	Modes of the engine brake ["The regulator in slow motion", "accelerator Pedal", "Cruise control", "Regulatory SYSTEM", "the Regulator speed", "traction Control", "Transmission", "ABS", "torque-Limiting", "lever, high-speed," "the brake system", "gas pedal", "remote"]
connect_bus_brake_pedal	Brake pedal state
connect_bus_o1_signal	Signal of the output 1 ["Disabled", "Digital", "inverted", "RANGE"]
connect_bus_proto_ver	Connect bus protocol version: v1 or v4
rf433_state	RF module status: if received value = 167, then connected any other value = disabled
delivery_time	The time of activation of the current module	s
last_activation_id	The ID of the last of the activation, and if the value is equal to: 0 = disabled, 1 = wake-up command to the serial 2 = wake-up command via the server 3 = wake-up detection of the cell 4 = the activation, as a rule, without communication, GPRS, 5 = all of the wake-up command via sms to 6 = activation by the rule of the inclinometer, 7 = activation, usually by the removal of the simcard
last_tombstone_id	The ID of the last shutdown, if the value is equal to: 0 = disabled, 1 = disable for the command-serial, 2 = off command via the server, 3 = disable detection of the cell 4 = off, as a rule, without communication, GPRS, 5 = disable command, via sms, 6 = off, as a rule for the inclinometer, 7 = off, as a rule for the removal of the simcard
melody	The kind of song that, if the value is equal to: 0 = NO BEEP-BEEP-OLD AND 1 = BEEP ONCE, 2 = A LONG BEEP AND A SHORT BEEP AND 3 = A SHORT BEEP AND A LONG BEEP AND 4 = ONE LONG BEEP AND TWO SHORT BEEPS - 5 = TWO SHORT BEEPS AND ONE LONG BEEP 6 = ONCE AGAIN, AND ONCE OLD 7 = SHORT BEEP LOOK 8 = LONG BEEP LOOK 9 = BEEPER FOR A SUPER LONG LOOK
comm_frequency	The value of the frequency of communication: RF
ext_analog_reader	Information of the reader, external analog Information is not sent in the ASCII protocol
max_speed_gps	The value of the maximum speed of the GPS between the message tracking (position)
fuel_system_status	If the value is 0, The motor is switched off If the bit is 0, 1 = open Circuit, due to the temperature, not the engine If the bit is 1, where 1 = closed-loop, using the feedback from the oxygen sensor in order to determine the mixture of the fuel Bit 2 1 = open Circuit due to the load on the engine fuel, due to the slowdown in Bit 4 1 = open Circuit due to a fault in the system Bit 5 1 = closed Circuit, by using at least one oxygen sensor, but there is a glitch in the system, feedback,
motor_load	Percentage or of the load current of the motor (from 0 up to 100%)	%
cooling_liquid_temp	The current value of the temperature of the liquid coolant in the engine
fuel_pressure	The current value of the pressure in the fuel you need to multiply by 3 to get the value	kPa
rpm	The current value of the RPM of the engine
speed	The current value for the speed of the vehicle
distance_indicator	Current value-led in the distance traveled (the information that is available only on the protocol (OBD2)
fuel_level	The current value of the level of the fuel tank
engine_oil_temp	The current value of the temperature of the oil in the motor
clearing_codes_dist	The current value of the distance from the cleaning up of the code information is available to you only on the protocol (OBD2)
odometer	The current odometer
room_temp	The current value of the ambient temperature
total_fuel_used	The current value of your total fuel used, source of information that is available only for internet protocol J1939)
fuel_economy	The current value of the economy, instant fuel source of information that is available only for internet protocol J1939)
acc_pedal	The current value of the position of the accelerator pedal (the information is only available for internet protocol J1939)
brake_pedal	The current value of the position of the brake pedal (the information is only available for internet protocol J1939)
torque	The current value of the torque of information that is available only for internet protocol J1939)
reverse_current	The current value of the reverse current information that is available only for internet protocol J1939)
total_engine_hours	Accumulated time of operation of the engine (the information is only available for internet protocol J1939)
add_info2	The formatted value in the hex containing the bits to the additional information in part 2
sysconfig	The current value of the range, the message will be sent the tracking information on the sleep that is used by the crawler
prev_sysconfig	The value of the previous range, the message will be sent multiple tracking in sleep
sysconfig_change_ts	The Timestamp of the last change in the value of the setting range, the message will be sent the tracking is in the sleep
max_rpm	The value of the RPM to the maximum measured during the interval of the delivery of the message tracking
min_rpm	The value of the RPM to the minimum measured during the interval mum of the delivery of the message tracking
avg_rpm	The value of RPM is the average measured at the interval of the delivery of the message tracking
comm_tech	The value of the communication technologies 0 = undefined GSM, 1 = GSM (2G) 2 = WCDMA, 3 = LTE 4 = GSM 5 = ALL OF THE DYNAMIC RANGE (HDR) 6 = TDSCDMA 7 = EMTC 8 = NB.
hour_meter_ign_on	The total amount of the tracer when the ignition is switched on	s
rf_sn	The serial number read from the tracker or the height of a lock to the RF that is configured as a master or a slave that is connected to this tracker
rf_fw_version	The current version of the firmware of the module
actuator_status_tracker	The Status of the actuator, a value that is in hexadecimal Bit 0 – no Actuator (1) of the crawler - Bit, 1 – Actuator, 2 crawler - Bit, 2 – Actuator (3) of the crawler - Bit, 3 – Actuator-4 crawler - Bit, 4 – Actuator-5 crawler - tracker Bit, 5 – Actuator-6 crawler - Bit 6 – Not used (always zero) Bit 7 – Not used (always zero) If the bit is equal to 1 = actuator is turned on If the bit is equal to 0 = actuator is turned off
actuator_status_keypad	The Status of the actuator, a value that is in hexadecimal Bit 0 – no Actuator (1) of the keyboard - Bit, 1 – Actuator, 2 keyboard - Bit, 2 – Actuator (3) keyboard - Bit, 3 – Actuator (4) of the keyboard, Bit 4 – Not used (always zero) Bit 5 – Not used (always zero) keypad Bit 6 – Not used (always zero) Bit 7 – Not used (always zero) If the bit is equal to 1 = actuator is turned on If the bit is equal to 0 = actuator is turned off
cumul_hour_meter_tristate_X	The time is measured to the hour meter from 0 to 4294967295	s
cumul_hour_meter_wrist_X	The time is measured to the hour meter from 0 to 4294967295	s
cumul_hour_meter_digital_X	The time is measured from the hour meter 0 to 4294967295	s

Parameter name

Description

Units

msg_type

Type 2

gps_validity

Indicates the validity of the GPS, with value 1 valid position and value 0 Invalid position.

hdop

HD information of the last valid GPS position.

sX_status

Status of the tracker sensors (Part 1) value. Tracker sensors in two bits:
1 = disabled
2 = Activated (violated)
10 = Disabled (restored)
11 = Cut or error
Sensor Status 1 - MSB:
Bit 0 - Status of sensor 1
Bit 1 - Status of sensor 1
Bit 2 - Status of sensor 2
Bit 3 - Status of sensor 2
Bit 4 - Status of sensor 3
Bit 5 - Status of sensor 3
Bit 6 - Status of sensor 4
Bit 7 - Status of sensor 4

ext_bat_status

Status of external battery (1 = conected, 0 = disconected)

int_bat_status

Status of the internal battery (1 = conected, 0 = disconected)

gps_ant_status

Status of the external GPS antenna (1 = conected, 0 = disconected)

connect_bus_ign

Ignition status (0 = ignition off 1 = ignition on)

k_sX_status

Status of the keyboard sensors value in hexadecimal.
1 = disable
2 = enable (violated)
10 = disable (restored)
11 = Cut or error
Bit 0 - Status of keyboard sensor 1
Bit 1 - Status of keyboard sensor 1
Bit 2 - Status of keyboard sensor 2
Bit 3 - Status of keyboard sensor 2
Bit 4 - Status of keyboard sensor 3
Bit 5 - Status of keyboard sensor 3
Bit 6 - Status of keyboard sensor 4
Bit 7 - Status of keyboard sensor 4

actuators_st1

Status of the actuators 1 tracker, value in hexadecimal.
Bit 0 - If value is equal to 1, indicates that the tracker is locked
Bit 1 - If value is equal to 1, indicates that the this tracker unlocked
Bit 2 - If value is equal to 1, indicates that the siren is connected
Bit 3 - If value is equal to 1, indicates that the buzzer is off
Bit 4 - If value is equal to 1, indicates that the lock is closed (if latch enabled)
Bit 5 - If value is equal to 1 indicates that the lock is open (when braking enabled)
Bit 6 - If value is equal to 1, indicates that the fifth wheel lock is open (when enabled fifth wheel)
Bit 7 - If value is equal to 1, indicates that the fifth wheel lock is closed (enabled when the fifth wheel)

actuators_st2

Status of the tracker actuators 2 value in hexadecimal.
Bit 0 - If value is equal to 1, indicates that the flash alert is on
Bit 1 - If value is equal to 1, indicates that the flash alert is off
Bit 2 - For future use (always 0)
Bit 3 - For future use (always 0)
Bit 4 - For future use (always 0)
Bit 5 - For future use (always 0)
Bit 6 - For future use (always 0)
Bit 7 - For future use (always 0)

ext_bat_volt

Voltage external battery, vehicle in volts.

int_bat_volt

Voltage internal battery, tracker, in volts.

connect_bus_odom

Odometer

gsm_signal

GSM modem signal level. This value is between 0 (weak) to 31 (strongest signal).

temp

For the temperature sensor, if a value of 0xFF indicates disabled sensor.

Value in hexadecimal. If the value other than 0xFF, then the temperature sensor is enabled, in this case following:

Bit 0 - temperature value - LSB

Bit 1 - Value temperature

Bit 2 - Value temperature

Bit 3 - Value temperature

Bit 4 - Value temperature

Bit 5 - Value temperature

Bit 6 - temperature value - MSB

Bit 7 - Signal - if value of 1 indicates negative value if value of 0 indicates a positive value

If the value is equal to 0xFE indicates that the temperature sensor is faulty hardware or not installed any temperature sensor.

seals

Status of the seals of the keyboard tracker sensors value in hexadecimal.

MSB:

If value 1 = 0 = sealed or unsealed

Bit 0 - Sensor 3 keyboard

Bit 1 - Sensor keyboard 4

Bit 2 - For future use, always 0

Bit 3 - For future use, always 0

Bit 4 - For future use, always 0

Bit 5 - For future use, always 0

Bit 6 - For future use, always 0

Bit 7 - For future use, always 0

LSB:

If value 1 = 0 = sealed or unsealed

Bit 0 - 1 Sensor tracker

Bit 1 - Sensor 2 crawler

Bit 2 - Sensor 3 crawler

Bit 3 - Sensor 4 tracker

Bit 4 - 5 Sensor tracker

Bit 5 - Sensor 6 crawler

Bit 6 - keyboard Sensor 1

Bit 7 - Keyboard Sensor 2

crawler_status

Crawler logical status:

Value 1 = switched on in ignition mode

Value = 2 in ignition off mode

Value = 3 in sleep mode

Value = 4 in internal battery mode value = 5

in deep sleep mode (post-production)

Value = 6 in breach mode

Value = 7 in super sleep mode (mobile)

movement_accel

Movement accelerometer (since the accelerometer is enabled)

(1 = moving or 0 = stopped)

accel_enabled

Accelerometer enabled

(1 = enabled or 0 = disabled)

anti_theft_mode

Much of the Fault Codes

travel_mode

Traveling mode (only when keyboard attached)

(1 = 0 = way trip or stop mode)

mixer_status

Mixer status (provided it is properly configured)

000 = Not enabled

001 = Stop mixer

010 = Mixer turning left (unloading)

011 = Mixer turning right (beating the cement)

100 = Mixer cement loading

111 = Invalid State

rain_sensor

Rain sensor (provided it is properly configured)

(1 = enabled or disabled = 0)

rem_fw_update

Remote Firmware Update

(1 = enabled or disabled = 0)

jammer

Active Jammer and detected

(1 = enabled or disabled = 0)

charger_status

Ccharger status of the internal battery

00 = no charger information

01 = loading process

10 = suspended load

11 = finished loading

event_id

Event id (for msg_type = 47)

event_paramX

Event parameters (number and meaning are based on event_id)

connect_bus_power_windows

Power windows

connect_bus_spraying_sections_state

State of the spraying sections

state

connect_bus_motor_load

Motor load

connect_bus_battery_charge_state_ev

Charging type an EV

connect_bus_cooling_liquid_temp

Cooling liquid temperature

connect_bus_engine_oil_pressure

Engine oil pressure

kPa

connect_bus_tire_pressure_td

The pressure of the Tire on the head

connect_bus_i2_type

Type of the second input
["Generic", "Hanger spindle", "Locking differential", "Dancer", "Wiper blade on the windscreen", "Resistance", "Violation of a Panel ON", "Default Panel-NF", "Panic-Button"]

connect_bus_fuel_type

The type of the fuel

["Methane", "Ethanol", "Diesel"]

connect_bus_app_volume_rate

The rate of the Volume of the App, for HA

connect_bus_alarm

Alarm

connect_bus_water_in_fuel

The indicator of the Water-In-Fuel sensor: Off, On

state

connect_bus_cotton_platform

Platform cotton state: Down Lower, Rising

connect_bus_i2_value

Value of the second input

connect_bus_motor_torque

Motor torque

connect_bus_battery_health_ev

Battery health (EV)

connect_bus_o2_signal

Signal of the second output

["Disabled", "Digital", "Digital" inverted", "RANGE"]

signal

connect_bus_cane_elevator_treadmill

State of the cane elevator treadmill

["Off", "On"]

connect_bus_motor_torque_percentage

Torque motor percentage

connect_bus_water_pump_sprayer

Water pump sprayer state
["Off", "On"]

connect_bus_o2_type

The type of the second output
["Generic", "Lock", "Lock box", "Relay-L15", "Siren"]

connect_bus_fuel_flow

Total fuel flow

(l/h)

connect_bus_passenger_door

Passenger door state (EV)

connect_bus_pump_to_diesel_flow

The flow from the Pump to a Diesel

connect_bus_clutch_pedal

Clutch pedal state

connect_bus_acc_pedal

Accelerator pedal pressure

connect_bus_door_passenger

State of the passenger door

connect_bus_air_conditioning_pwr_ev

The power of the Air-Conditioning system (IV)

connect_bus_liquid_release_spray

["Off", "On"]

connect_bus_cane_production

["Off", "On"]

connect_bus_battery_average_savings_ev

Average savings of Battery power (EV)

connect_bus_pto

PTO active

connect_bus_gear

Gear

march

connect_bus_electric_motor_temp_ev

The temperature of the Electric Motor (EV)

°C

connect_bus_fault_codes_amount

Fault codes amount

connect_bus_heater_pwr_ev

The power of the Heater (EV)

connect_bus_msg_type

Message type

00 OK
01 out of range
02 challenge timeout
03 Invalid challenge response
04 Lock activation not enabled on HW
05 CAN communication timeout
06 CAN initialization error
07 CAN encryption error
08 Error in CAN lock/unlock actuation
09 Did not correctly record/execute the procedure
10 Microcontroller flash memory problem
11 Vehicle communication error
12 Seed collection error
13 Key sending error
14 Error reading lock write confirmation
15 Error writing lock
16 Incompatible ECU Software Information/Number
17 Error maintaining communication with the vehicle
18 CAN0 communication not found
19 CAN1A communication not found
20 CAN1B communication not found
21 J1587 communication not found
22 KWP1 communication not found
23 KWP2 communication not found
24 CAN0 and CAN1A communication not found
25 CAN0, CAN1A and CAN1B communication not found
26 CAN1A and CAN1B communication not found
27 CAN0 and J1587 communication not found
28 CAN1A and J1587 communication not found
29 CAN0, CAN1A and J1587 communication not found
30 vehicle turned off
31 moving vehicle
34 KWP error during lock/unlock procedure
35 Backup not available at start of lock/unlock
36 Error reading parameters for blocking
37 Cylinder cutting error
38 Error during KWP seed request
39 Error did not accept KWP key command
40 Vehicle error did not respond to KWP key command
41 Error reading backup information
42 Size error comparing backups
43 Error comparing backups
44 Authentication session error
45 Reentrant function error
46 invalid tracker error
47 timeout error
48 Accelerator pedal pressed error

connect_bus_fuel_level

Fuel Level

connect_bus_oil_engine_pressure

The pressure of the engine oil

connect_bus_e_pedal

E-pedal State (EV)

connect_bus_tire_pressure_te

Tire pressure (TE)

Psi

connect_bus_cotton_harvesting_unit

Cotton harvesting state

connect_bus_charging_cable_ev

A Charging cable is Plugged in (EV)

connect_bus_brake_time

Time to brake

connect_bus_headlights

The state of the lights

connect_bus_speed_ev

Vehicle speed (EV)

connect_bus_coupler_back

position of the coupler back

connect_bus_tire_pressure_de

Tire pressure DE

connect_bus_o2_value

Value of the second output

connect_bus_cotton_packer

Cotton packer state
["Off", "On"]

connect_bus_brake_parking

Brake, Parking

connect_bus_electric_motor_current_ev

Electric motor current (EV)

connect_bus_airbag

Airbag state

connect_bus_arla32_level

ARLA32 level

connect_bus_dtc_present

["No fault", "fault"]

connect_bus_lever

State of the lever
["Down", "Right", "Left"]

connect_bus_rtk_autopilot

State-BASE / Auto-Pilot
["Off", "On"]

connect_bus_eng_on_dur

Duration of engine on

connect_bus_engine_rpm

Revolutions per minute of the engine

rpm

connect_bus_int_resist

Resistance of internal battery

connect_bus_hitch_to_front

Position of hitch to the front

connect_bus_load_speed

Load speed of the motor

connect_bus_seatbelt_passenger

Seatbelt, Driver
["Not fastened", "Buckled"]

connect_bus_i1_value

Value of the first input

connect_bus_ign_on_duration

Duration of Ignition On

connect_bus_air_temp

Air temperature

connect_bus_intake_air_pressure

Intake air pressure

connect_bus_blink_warning

Blink warning

["Off", "On"]

connect_bus_clutch

Clutch switch
["Moving", "Stationary", "Open", "Closed"]

connect_bus_engine_brake_mode

Engine brake mode:

The regulator in slow motion
Accelerator Pedal
Cruise control
Regulatory SYSTEM
the Regulator speed
Traction Control
Transmission
ABS
Torque-Limiting
Lever, high-speed
The brake system
Gas pedal
remote

connect_bus_out_turbo_oil_temp

Oil temperature in turbo

°C

connect_bus_right_rear_door

["Open", "Closed", "Locked"]

connect_bus_charging_type_ev

["Not Loading", "Slow Loading", "Fast Loading"]

connect_bus_o1_type

["Generic", "Lock", "Lock box", "Relay-L15", "Siren"]

connect_bus_battery_life_ev

Battery life (EV)

connect_bus_lambda

connect_bus_time_to_charge_80

The time of 80% charge (EV)

connect_bus_seatbelt_driver

State of the driver's seatbelt
["not fastened", "Buckled"]

connect_bus_charging_voltage_ev

Charging voltage type (EV)
["Not loading", "AC", "DC"]

State

connect_bus_eco_mode

Eco-mode state (EV)
["Off", "On"]

connect_bus_intake_manifold_temp

Engine Intake Manifold 1 Temperature

connect_bus_door_driver

State of the driver's door
["Open", "Closed", "Locked"]

connect_bus_primary_air_pressure

Pressure In The Air Reservoir, The Primary

connect_bus_trans_oil_temp

Transmission oil temperature

°C

connect_bus_fuel_temp

Fuel temperature

°C

connect_bus_primary_air_reservoir_pressure

The pressure of the Air in the Reservoir, the Primary

connect_bus_pwr_int

Internal voltage

connect_bus_engine_hours

Total engine hours

connect_bus_air_conditioning_temp

The Selected temperature of the Air-Conditioning system

°C

connect_bus_current_battery_capacity_ev

The Current capacity of the Battery (EV)

connect_bus_speed

The speed determined by the tachograph

connect_bus_pwr_int_ev

Interval power voltage

connect_bus_oil_hydraulic_temp

Oil hydraulic temperature

connect_bus_grain_unloading

["Off", "On"]

connect_bus_wiper_blade

Wiper Blade for windshield
["Off", "On"]

connect_bus_trunk

["Open", "Closed", "Locked"]

connect_bus_full_charge_time_ev

Charge time to full (100%) (EV)

connect_bus_payload_ver

Version of the payload like 1.2.3

connect_bus_traction

Traction

connect_bus_left_rear_door

["Open", "Closed", "Locked"]

connect_bus_eng_oil_level

Oil level in engine

connect_bus_distance_to_service

Distance to the Service

connect_bus_battery_output_pwr_ev

Battery voltage (EV)

connect_bus_i1_signal

Signal of the first input
["Disabled", "Digital", "Analog"]

connect_bus_i2_signal

Signal of the second input
["Disabled", "Digital", "Analog"]

connect_bus_tire_pressure_dd

Tire pressure (DD)

Psi

connect_bus_o1_value

Value of output 1

connect_bus_clutch_time

Time to clutch

connect_bus_engine_brake

Engine brake state
["Off", "On"]

connect_bus_load_code

Load code

connect_bus_turbo_pressure

Turbo pressure

connect_bus_angle

The angle of the steering Wheel

connect_bus_tank_ethanol_percentage

Percentage of Ethanol in the Tank

connect_bus_maximum_battery_capacity_ev

The Maximum capacity of the Battery (EV)

connect_bus_i1_type

Type of the input 1
["Generic", "Hanger spindle", "Locking differential", "Dancer", "Wiper blade on the windscreen", "Resistance", "Violation of a Panel ON", "Default Panel-NF", "Panic-Button"]

connect_bus_instant_savings

Instant savings

connect_bus_odometer

Hour meter

connect_bus_nitrogen_oxides_nox

Nitrogen oxides (Nox)

ppm

connect_bus_average_savings

Average savings

connect_bus_court_pressure

Court pressure

connect_bus_primary_cane_extractor

State of the cane extractor

connect_bus_total_fuel

Total fuel used

connect_bus_battery_temp_ev

Temperature of the battery (EV)

connect_bus_air_conditioning

["Off", "On"]

connect_bus_o2_percentage

O2 Percentage

connect_bus_eng_oil_temp

Engine oil temperature

connect_bus_available_regeneration_pwr_ev

Available regeneration power (EV)

connect_bus_the_modes_of_the_engine_brake

Modes of the engine brake
["The regulator in slow motion", "accelerator Pedal", "Cruise control", "Regulatory SYSTEM", "the Regulator speed", "traction Control", "Transmission", "ABS", "torque-Limiting", "lever, high-speed," "the brake system", "gas pedal", "remote"]

connect_bus_brake_pedal

Brake pedal state

connect_bus_o1_signal

Signal of the output 1
["Disabled", "Digital", "inverted", "RANGE"]

connect_bus_proto_ver

Connect bus protocol version: v1 or v4

rf433_state

RF module status:

if received value = 167, then connected
any other value = disabled

delivery_time

The time of activation of the current module

last_activation_id

The ID of the last of the activation, and if the value is equal to:
0 = disabled,
1 = wake-up command to the serial
2 = wake-up command via the server
3 = wake-up detection of the cell
4 = the activation, as a rule, without communication, GPRS,
5 = all of the wake-up command via sms
to 6 = activation by the rule of the inclinometer,
7 = activation, usually by the removal of the simcard

last_tombstone_id

The ID of the last shutdown, if the value is equal to:
0 = disabled,
1 = disable for the command-serial,
2 = off command via the server,
3 = disable detection of the cell
4 = off, as a rule, without communication, GPRS,
5 = disable command, via sms,
6 = off, as a rule for the inclinometer,
7 = off, as a rule for the removal of the simcard

melody

The kind of song that, if the value is equal to:
0 = NO BEEP-BEEP-OLD
AND 1 = BEEP ONCE,
2 = A LONG BEEP AND A SHORT BEEP
AND 3 = A SHORT BEEP AND A LONG BEEP
AND 4 = ONE LONG BEEP AND TWO SHORT BEEPS -
5 = TWO SHORT BEEPS AND ONE LONG BEEP
6 = ONCE AGAIN, AND ONCE OLD
7 = SHORT BEEP LOOK
8 = LONG BEEP LOOK
9 = BEEPER FOR A SUPER LONG LOOK

comm_frequency

The value of the frequency of communication: RF

ext_analog_reader

Information of the reader, external analog
Information is not sent in the ASCII protocol

max_speed_gps

The value of the maximum speed of the GPS between the message tracking (position)

fuel_system_status

If the value is 0, The motor is switched off
If the bit is 0, 1 = open Circuit, due to the temperature, not the engine
If the bit is 1, where 1 = closed-loop, using the feedback from the oxygen sensor in order to determine the mixture of the fuel
Bit 2 1 = open Circuit due to the load on the engine fuel, due to the slowdown in
Bit 4 1 = open Circuit due to a fault in the system
Bit 5 1 = closed Circuit, by using at least one oxygen sensor, but there is a glitch in the system, feedback,

motor_load

Percentage or of the load current of the motor (from 0 up to 100%)

cooling_liquid_temp

The current value of the temperature of the liquid coolant in the engine

fuel_pressure

The current value of the pressure in the fuel you need to multiply by 3 to get the value

kPa

rpm

The current value of the RPM of the engine

speed

The current value for the speed of the vehicle

distance_indicator

Current value-led in the distance traveled (the information that is available only on the protocol (OBD2)

fuel_level

The current value of the level of the fuel tank

engine_oil_temp

The current value of the temperature of the oil in the motor

clearing_codes_dist

The current value of the distance from the cleaning up of the code information is available to you only on the protocol (OBD2)

odometer

The current odometer

room_temp

The current value of the ambient temperature

total_fuel_used

The current value of your total fuel used, source of information that is available only for internet protocol J1939)

fuel_economy

The current value of the economy, instant fuel source of information that is available only for internet protocol J1939)

acc_pedal

The current value of the position of the accelerator pedal (the information is only available for internet protocol J1939)

brake_pedal

The current value of the position of the brake pedal (the information is only available for internet protocol J1939)

torque

The current value of the torque of information that is available only for internet protocol J1939)

reverse_current

The current value of the reverse current information that is available only for internet protocol J1939)

total_engine_hours

Accumulated time of operation of the engine (the information is only available for internet protocol J1939)

add_info2

The formatted value in the hex containing the bits to the additional information in part 2

sysconfig

The current value of the range, the message will be sent the tracking information on the sleep that is used by the crawler

prev_sysconfig

The value of the previous range, the message will be sent multiple tracking in sleep

sysconfig_change_ts

The Timestamp of the last change in the value of the setting range, the message will be sent the tracking is in the sleep

max_rpm

The value of the RPM to the maximum measured during the interval of the delivery of the message tracking

min_rpm

The value of the RPM to the minimum measured during the interval mum of the delivery of the message tracking

avg_rpm

The value of RPM is the average measured at the interval of the delivery of the message tracking

comm_tech

The value of the communication technologies
0 = undefined GSM,
1 = GSM (2G)
2 = WCDMA,
3 = LTE
4 = GSM
5 = ALL OF THE DYNAMIC RANGE (HDR)
6 = TDSCDMA
7 = EMTC
8 = NB.

hour_meter_ign_on

The total amount of the tracer when the ignition is switched on

rf_sn

The serial number read from the tracker or the height of a lock to the RF that is configured as a master or a slave that is connected to this tracker

rf_fw_version

The current version of the firmware of the module

actuator_status_tracker

The Status of the actuator, a value that is in hexadecimal
Bit 0 – no Actuator (1) of the crawler -
Bit, 1 – Actuator, 2 crawler -
Bit, 2 – Actuator (3) of the crawler -
Bit, 3 – Actuator-4 crawler -
Bit, 4 – Actuator-5 crawler - tracker
Bit, 5 – Actuator-6 crawler -
Bit 6 – Not used (always zero)
Bit 7 – Not used (always zero)
If the bit is equal to 1 = actuator is turned on
If the bit is equal to 0 = actuator is turned off

actuator_status_keypad

The Status of the actuator, a value that is in hexadecimal
Bit 0 – no Actuator (1) of the keyboard -
Bit, 1 – Actuator, 2 keyboard -
Bit, 2 – Actuator (3) keyboard -
Bit, 3 – Actuator (4) of the keyboard,
Bit 4 – Not used (always zero)
Bit 5 – Not used (always zero) keypad
Bit 6 – Not used (always zero)
Bit 7 – Not used (always zero)
If the bit is equal to 1 = actuator is turned on
If the bit is equal to 0 = actuator is turned off

cumul_hour_meter_tristate_X

The time is measured to the hour meter from 0 to 4294967295

cumul_hour_meter_wrist_X

The time is measured to the hour meter from 0 to 4294967295

cumul_hour_meter_digital_X

The time is measured from the hour meter 0 to 4294967295

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

RST-TG100

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon