OBD-200L

OBD-200L
Manufacturer: PCL
Forum Discussion

Number of units

0
Online
10
Total
Supported in Wialon:
  • Accelerometer
  • Communication via TCP

The following data should also be added to OBD-200L unit properties section of Wialon GPS tracking software :

Device type: OBD-200L
Unique ID: serial

Specify the following parameters in configuration software or configuration OBD-200L for use in Wialon Hosting :

Server port: 21769

10 units of OBD-200L device type are connected to Wialon Data Center. This represents 0.01% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
gps_mark

GPS data mark:
0 - conventional GPS data upload
1 - GPS history data upload

alarm_num

Terminal equipment custom alarm number

sw_ver

Software version number

hw_ver

Hardware version number

capture_interval OBD PID collection interval s
pidsN

OBD PIDs list (hexadecimal format)

pids_valN OBD PIDs value (hexadecimal format)
collect_interval

G-Sensor sampling collection interval

ms
avarage_gx

The average X axis acceleration

g
max_gx

Max X axis acceleration

g
min_gx

Min X axis acceleration

g
avarage_gy

The average Y axis acceleration

g
max_gy

Max Y axis acceleration

g
min_gy

Min Y axis acceleration

g
avarage_gz

The average Z axis acceleration

g
max_gz

Max Z axis acceleration

g
min_gz

Min Z axis acceleration

g
alarm_flagN

New alarm flag:
0 - end alarm
1 - new alarm

alarm_thresholdN Alarm threshold
alarm_typeN Alarm type
alarm_valN Alarm value
curr_fuel From latest_acc_tm to the current consumption L
curr_mileage From latest_acc_tm to the current mileage m
device_tm Current time of the device
dtc_mark

DTC mark:
0 - store
1 - pending

dtcs DTC types list (hexadecimal format)
frame_mark

Freeze frame mark:
0 - snapshot data
1 - free frame data

latest_acc_tm Latest ACC ignition time of the vehicle OBD
loc_type

Location type:
0 - No location
1 - 2D location
3 - 3D location

msg_type Message type (hexadecimal format)
reserve Monitoring data from running system
sN

Vehicle state byte N
s0:

  • Bit1 - Low voltage
  • Bit2 - Towing
  • Bit3 - Speeding
  • Bit4 - High engine coolant temperature
  • Bit5 - Hard acceleration
  • Bit6 - Hard deceleration
  • Bit7 - Idle engine
  • Bit8 - Exhaust Emission
s1

:

  • Bit1 - High RPM
  • Bit2 - Power on
  • Bit3 - Quick lane change
  • Bit4 - Sharp turn
  • Bit5 - Fatigue driving
  • Bit6 - Emergency
  • Bit7 - Crash
  • Bit8 - Tamper
s2

:

  • Bit1 - Illegal enter
  • Bit2 - Illegal ignition
  • Bit3 - Ignition on
  • Bit4 - Privacy status
  • Bit5 - No GPS device
  • Bit6 - Power off
  • Bit7 - OBD communication error
  • Bit8 - MIL
s3

:

  • Bit1 - Unlock
  • Bit2 - No card presented
  • Bit3 - Dangerous driving
  • Bit4 - Vibration

total_fuel Total fuel consumption from OBD power on to latest_acc_tm L
total_mileage Accumulated mileage from OBD power on to latest_acc_tm m
rpm RPM value

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone