OBD tracker Ulbotech T371 | Integrated with Wialon

Features Ulbotech T371:

3G
Blackbox
GLONASS support
Built-in odometer

Supported in Wialon:

Accelerometer
ADC sensors
Remote management via GPRS
LBS
Remote management via SMS
Alarm button
Communication via TCP
Communication via UDP

Can be supported upon request:

CAN-bus support

The following data should also be added to Ulbotech T371 unit properties section of Wialon GPS tracking software :

Device type:	Ulbotech T371
Unique ID:	imei

Specify the following parameters in configuration software or configuration Ulbotech T371 for use in Wialon Hosting :

Server port:

20990

16 units of Ulbotech T371 device type are connected to Wialon Data Center. This represents 0.02% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
adc0	External power supply voltage	V
adc1	Device temperature	°C
adc2	Device backup battery voltage	V
adc3	Analog input voltage (connect to device IO port)	V
alarm	Alarm triggered. Each bit relate to one alarm status of the device: Bit0: External Power off alarm Bit1: Motion alarm Bit2: Over speed alarm Bit3: Jamming alarm Bit4: Geo-fence alarm Bit5: Towing alarm Bit6: Input low alarm Bit10: Panic button alarm (SOS) Bit11: OBD alarm Bit14: Accident alarm Bit15: Power low alarm
cell_id	ID of Base transceiver station (BTS) or sector of a BTS within a Location area code (LAC)
device_status	Device status. Each bit relate to one status of the device: Bit0: Powered with external/internal power Bit1: Move/stop Bit2: Over speed status Bit3: Jamming status Bit4: Geo-fence alarm status Bit5: Immobilize status Bit6: ACC status Bit7: Input level low/high Bit8: Input level middle Bit9: Engine status Bit10: Panic button status Bit11: OBDII alarm status Bit12: Angle rapid change alert Bit13: Speed rapid change alert Bit14: Domestic roaming (judged by MNC) Bit15: International roaming (judged by MCC)
fuel_volume	Fuel consumption	Liter
geo_alarm	Geo-fence alarm status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5 . Bit definition: 0: no alarm triggered in this fence 1: alarm triggered in this fence
geo_status	Geo-fence in/out status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5 . Bit definition: 0: device out the fence or no fence is set in this bit 1: device is inside of the fence
gps_status	2D/3D locating mark: 1: no signal 2: with 2D signal 3: with 3D signal
gsm_signal	GSM signal strenth	-dbm
hdb	Harsh driver behavior data. Each bit relate to one status of the hash driver behavior: Bit0: Rapid Acceleration Bit1: Rough Braking Bit2: Harsh course Bit3: No warm up Bit4: Long idle Bit5: Fatigue driving Bit6: Rough terrain Bit7: High RPM
hdop	HDOP (Horizontal Dilution of Precision)
lac	Local Area Code
mcc	Mobile Country Code
mileage	Mileage	m
mnc	Mobile Network Code
sN_pidM	Value of OBDII PID M of server N
vin	Vehicle identification number

Parameter name

Description

Units

adc0

External power supply voltage

adc1

Device temperature

°C

adc2

Device backup battery voltage

adc3

Analog input voltage (connect to device IO port)

alarm

Alarm triggered. Each bit relate to one alarm status of the device:
Bit0: External Power off alarm
Bit1: Motion alarm
Bit2: Over speed alarm
Bit3: Jamming alarm
Bit4: Geo-fence alarm
Bit5: Towing alarm
Bit6: Input low alarm
Bit10: Panic button alarm (SOS)
Bit11: OBD alarm
Bit14: Accident alarm
Bit15: Power low alarm

cell_id

ID of Base transceiver station (BTS) or sector of a BTS within a Location area code (LAC)

device_status

Device status. Each bit relate to one status of the device:
Bit0: Powered with external/internal power
Bit1: Move/stop
Bit2: Over speed status
Bit3: Jamming status
Bit4: Geo-fence alarm status
Bit5: Immobilize status
Bit6: ACC status
Bit7: Input level low/high
Bit8: Input level middle
Bit9: Engine status
Bit10: Panic button status
Bit11: OBDII alarm status
Bit12: Angle rapid change alert
Bit13: Speed rapid change alert
Bit14: Domestic roaming (judged by MNC)
Bit15: International roaming (judged by MCC)

fuel_volume

Fuel consumption

Liter

geo_alarm

Geo-fence alarm status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: no alarm triggered in this fence
1: alarm triggered in this fence

geo_status

Geo-fence in/out status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: device out the fence or no fence is set in this bit
1: device is inside of the fence

gps_status

2D/3D locating mark:

1: no signal

2: with 2D signal

3: with 3D signal

gsm_signal

GSM signal strenth

-dbm

hdb

Harsh driver behavior data. Each bit relate to one status of the hash driver behavior:
Bit0: Rapid Acceleration
Bit1: Rough Braking
Bit2: Harsh course
Bit3: No warm up
Bit4: Long idle
Bit5: Fatigue driving
Bit6: Rough terrain
Bit7: High RPM

hdop

HDOP (Horizontal Dilution of Precision)

lac

Local Area Code

mcc

Mobile Country Code

mileage

Mileage

mnc

Mobile Network Code

sN_pidM

Value of OBDII PID M of server N

vin

Vehicle identification number

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

Ulbotech T371

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon