Concox JM-VL01

Manufacturer: Jimi IoT (Concox)

Forum Discussion

Number of units

693

Online

1240

Total

Features Concox JM-VL01:

The following data should also be added to Concox JM-VL01 unit properties section of Wialon GPS tracking software :

Device type:	Concox JM-VL01
Unique ID:	imei

Specify the following parameters in configuration software or configuration Concox JM-VL01 for use in Wialon Hosting :

Server port:

22081

1240 units of Concox JM-VL01 device type are connected to Wialon Data Center. This represents 0.05% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm_type	Type of alarm: 0 - Normal position package 1 - SOS alarm 2 - Ext-power cut alarm 3 - Vibration alarm 4 - Enter geo-fence 5 - Exit geo-fence 6 - Speeding 9 - Vibration alarm 10 - Enter GPS dead zone alarm 11 - Exit GPS dead zone alarm 14 - Low battery alarm 25 - External battery low alarm
voltage	Voltage of ext-power supply.	V
gsm	GSM signal strength
wifi_lvl_n	Signal strength
acc	00 - acc low 01 - acc high
data_mode	0x00 upload in fixed time interval 0x01 upload based on fixed distance 0x02 inflection data upload 0x03 ACC status change data upload 0x04 The last valid data is uploaded when the device changes from motion to static state 0x05 The last valid data is uploaded when the network is disconnected 0x06 upload GPS data when Ephemeris updated 0x07 Press button to upload 0x08 upload when device power on 0x09 Upload LBS data after power on
gps_real_up	GPS data re-upload in real-time: 0x00 re-upload in real-time 0x01 re-upload
alarm_value	When the alarm type is 0x06, the alarm value is the speed, km/hour
command_executed	executed command