GPS tracker Skypatrol SP1824V2 | Integrated with Wialon

Features Skypatrol SP1824V2:

4G/LTE
Blackbox

Supported in Wialon:

Communication via TCP
Communication via UDP

The following data should also be added to Skypatrol SP1824V2 unit properties section of Wialon GPS tracking software :

Device type:	Skypatrol SP1824V2
Unique ID:	custom

Specify the following parameters in configuration software or configuration Skypatrol SP1824V2 for use in Wialon Hosting :

Server port:

22987

1 units of Skypatrol SP1824V2 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
pwr_solar	Voltage supplied by Solar panel for devices that support one	V
gpio2_N	GPIO2
mcc	MCC
mnc	MNC
service_type	Cellular service class: 0: No service 1: CDMA 1x 2: GPRS 3: HSPA 4: LTE-Cat1 5: LTE-M1
roaming	Roaming: 0: No roaming or no service 1: Roaming
rssi	Qualitive indication of the RF signal strength
pwr_aux	Auxiliary power, which is the voltage of external secondary power source, such as vehicle running lights	V
hdop	Indication of the quality of the received signal
chan	Channel number within the frequency band
sid	SID
centroid_lat	Centroid Lat
rnc	RNC
cid	CID
gps_status	GPS Status, Bits 6-4: 000: GPS is not locked 001: GPS is locked
os_main	Revision of the operating system
gpio1_N	GPIO1
ci	CI
nid	NID
product_id	Product ID
odometer	Odometer	m
configuration	Version of the Configuration file
ec	EC
file_target	0 = Reserved 1 = Application 4 = User Config 5 = Default Config 6 = Daughter MCU 7 = Peripheral Update
tx	TX
temperature	Temperature measured inside the device	°C
bid	BID
io	Revision of the MCU firmware if applicable
pwr_ext	Main power, which is typically the voltage of the vehicle battery that powers the device	V
pwr_int	Internal battery voltage for devices that are self-powered or have a backup battery	V
file_error_code	The reason of the file transfer failure
app	Version and revision of the Application
rx	RX
bcx	Frequency band code
event	The reason the report was generated
file_status	Status of the file transfer. A ‘0’ indicates a successful file transfer
lac	LAC
os_extended	Secondary version of the operating system available on some of the devices
centroid_lon	Centroid Lon
hid	Hardware model and revision of the device
ppn	Sub-channel

Parameter name

Description

Units

pwr_solar

Voltage supplied by Solar panel for devices that support one

gpio2_N

GPIO2

mcc

MCC

mnc

MNC

service_type