Concox GV40 4G-LTE

Concox GV40 4G-LTE
Manufacturer: Jimi IoT (Concox)
Forum Discussion

Number of units

Features Concox GV40 4G-LTE:
  • 4G/LTE
  • Blackbox

The following data should also be added to Concox GV40 4G-LTE unit properties section of Wialon GPS tracking software :

Device type: Concox GV40 4G-LTE
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox GV40 4G-LTE for use in Wialon Hosting :

Server port: 21908

102 units of Concox GV40 4G-LTE device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units

Type of alarm:

0 - Normal position package
1 - SOS alarm
2 - Ext-power cut alarm
3 - Vibration alarm
4 - Enter geo-fence
5 - Exit geo-fence
6 - Speeding
9 - Vibration alarm
10 - Enter GPS dead zone alarm
11 - Exit GPS dead zone alarm
14 - Low battery alarm
25 - External battery low alarm

voltage Voltage of ext-power supply. V
gsm GSM signal strength
wifi_lvl_n Signal strength
  • 00 - acc low
  • 01 - acc high
  • 0x00 upload in fixed time interval
  • 0x01 upload based on fixed distance
  • 0x02 inflection data upload
  • 0x03 ACC status change data upload
  • 0x04 The last valid data is uploaded when the device changes from motion to static state
  • 0x05 The last valid data is uploaded when the network is disconnected
  • 0x06 upload GPS data when Ephemeris updated
  • 0x07 Press button to upload
  • 0x08 upload when device power on
  • 0x09 Upload LBS data after power on

GPS data re-upload in real-time:

  • 0x00 re-upload in real-time
  • 0x01 re-upload

alarm_value When the alarm type is 0x06, the alarm value is the speed, km/hour
command_executed executed command

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*