GPS tracker Concox X1 | Integrated with Wialon

Features Concox X1:

Blackbox

Supported in Wialon:

ADC sensors
Camera connection
Remote management via GPRS
Driver identification
Digital sensors
Alarm button
Communication via TCP

The following data should also be added to Concox X1 unit properties section of Wialon GPS tracking software :

Device type:	Concox X1
Unique ID:	imei

Specify the following parameters in configuration software or configuration Concox X1 for use in Wialon Hosting :

Server port:

21408

64 units of Concox X1 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm_type	Type of alarm: 0 - Normal position package 1 - SOS alarm 2 - Ext-power cut alarm 3 - Vibration alarm 4 - Enter geo-fence 5 - Exit geo-fence 6 - Speeding 14 - Internal battery low voltage 48 - ACC ON 49 - ACC OFF 50 - IN3 active 51 - IN3 release 52 - IN4 active 53 - IN4 release 54 - Fatigue driving 55 - Fatigue relieve 56 - Idling 57 - Login 58 - Log out 59 - High temperature alarm 60 - Low temperature alarm 61 - COM port communication ERROR 62 - Harsh Accelerate 63 - Harsh Braking 64 - Enter Sleep 65 - Wake Up 66 - GPS Jamming 67 - GSM Jamming 68 - GPS Antenna Cut
temp_sens	Temperature sensor number
status	Bitwise parameter: Bit 4 - Idling Running; Bit 5 - Fatigue Driving; Bit 6 - Ext-power power low voltage; Bit 7 - Ext-power lost; Bit 8 - GPS antenna cut flag;
mileage	Odometer	m
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
rfid	RFID/iButton tag ID; If RFID-data = 0 - empty RFID/iButton data
pwr_ext	Voltage of ext-power supply	V
pwr_int	Voltage of internal battery	V
sensN_M	Sensor with type N and number M. External sensor data which connected to terminal.
inN	Value of digital input with number N: 1- SOS status 2 - ACC status 3 - IN3 status 4 - IN4 status 5 - IN5 status 6 - IN6 status 7 - IN7 status 8 - IN8 status
adcN	The voltage of analog data input witn number N.	0.01V
outN	Status of digital output with number N: 1 - OUTPUT1 status 2 - OUTPUT2 status 3 - OUTPUT3 status 4 - OUTPUT4 status 5 - OUTPUT5 status 6 - OUTPUT6 status 7 - OUTPUT7 status 8 - OUTPUT8 status
pho_src	Event source of taking photograph: 0 - Photographing by command 1 - SOS Alarm 2 - Photographing when ext-power cut off 3 - Photographing when Vibration alarm 4 - Photographing when enter geo-fence 5 - Photographing when exit geo-fence 6 - Photographing when speeding 14 - Photographing when internal battery low voltage 48 - Photographing when ACC ON 49 - Photographing when ACC OFF 50 - Photographing when IN3 active 51 - Photographing when IN3 release 52 - Photographing when IN4 active 53 - Photographing when IN4 release 54 - Photographing when fatigue driving 55 - Photographing when fatigue relieve 56 - Photographing when idling 57 - Photographing when login 58 - Photographing when logout 59 - Photographing when high temperature alarm 60 - Photographing when low temperature alarm 61 - Photographing when COM port communication error 62 - Photographing when Harsh Accelerate 63 - Photographing when Harsh Braking 64 - Photographing when Enter Sleep 65 - Photographing when Wake Up 66 - Photographing when GPS Jamming 67 - Photographing when GSM Jamming 68 - Photographing when GPS Antenna Cut 255 - Timing photographing
state	Bitwise parameter: Bit 1 - 1: Defense active; 0: Defense deactive; Bit 2 - 1: ACC ON; 0: ACC OFF; Bit 3 - 1: Charging on; 0: Charging off; Bit 7 - 1: GPS tracking is on; 0: GPS tracking is off; Bit 8 - 1: Oil and electricity disconnected; 0: Oil and electricity connected;

Parameter name

Description

Units

alarm_type

Type of alarm:

0 - Normal position package
1 - SOS alarm
2 - Ext-power cut alarm
3 - Vibration alarm
4 - Enter geo-fence
5 - Exit geo-fence
6 - Speeding
14 - Internal battery low voltage
48 - ACC ON
49 - ACC OFF
50 - IN3 active
51 - IN3 release
52 - IN4 active
53 - IN4 release
54 - Fatigue driving
55 - Fatigue relieve
56 - Idling
57 - Login
58 - Log out
59 - High temperature alarm
60 - Low temperature alarm
61 - COM port communication ERROR
62 - Harsh Accelerate
63 - Harsh Braking
64 - Enter Sleep
65 - Wake Up
66 - GPS Jamming
67 - GSM Jamming
68 - GPS Antenna Cut

temp_sens

Temperature sensor number

status

Bitwise parameter:
Bit 4 - Idling Running;
Bit 5 - Fatigue Driving;
Bit 6 - Ext-power power low voltage;
Bit 7 - Ext-power lost;
Bit 8 - GPS antenna cut flag;

mileage

Odometer

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

rfid

RFID/iButton tag ID;
If RFID-data = 0 - empty RFID/iButton data

pwr_ext

Voltage of ext-power supply

pwr_int

Voltage of internal battery

sensN_M

Sensor with type N and number M. External sensor data which connected to terminal.

inN

Value of digital input with number N:
1- SOS status
2 - ACC status
3 - IN3 status
4 - IN4 status
5 - IN5 status
6 - IN6 status
7 - IN7 status
8 - IN8 status

adcN

The voltage of analog data input witn number N.

0.01V

outN

Status of digital output with number N:
1 - OUTPUT1 status
2 - OUTPUT2 status
3 - OUTPUT3 status
4 - OUTPUT4 status
5 - OUTPUT5 status
6 - OUTPUT6 status
7 - OUTPUT7 status
8 - OUTPUT8 status

pho_src

Event source of taking photograph:
0 - Photographing by command
1 - SOS Alarm
2 - Photographing when ext-power cut off
3 - Photographing when Vibration alarm
4 - Photographing when enter geo-fence
5 - Photographing when exit geo-fence
6 - Photographing when speeding
14 - Photographing when internal battery low voltage
48 - Photographing when ACC ON
49 - Photographing when ACC OFF
50 - Photographing when IN3 active
51 - Photographing when IN3 release
52 - Photographing when IN4 active
53 - Photographing when IN4 release
54 - Photographing when fatigue driving
55 - Photographing when fatigue relieve
56 - Photographing when idling
57 - Photographing when login
58 - Photographing when logout
59 - Photographing when high temperature alarm
60 - Photographing when low temperature alarm
61 - Photographing when COM port communication error
62 - Photographing when Harsh Accelerate
63 - Photographing when Harsh Braking
64 - Photographing when Enter Sleep
65 - Photographing when Wake Up
66 - Photographing when GPS Jamming
67 - Photographing when GSM Jamming
68 - Photographing when GPS Antenna Cut
255 - Timing photographing

state

Bitwise parameter:
Bit 1 - 1: Defense active; 0: Defense deactive;
Bit 2 - 1: ACC ON; 0: ACC OFF;
Bit 3 - 1: Charging on; 0: Charging off;
Bit 7 - 1: GPS tracking is on; 0: GPS tracking is off;
Bit 8 - 1: Oil and electricity disconnected; 0: Oil and electricity connected;

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

Concox X1

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon