Concox X3

Concox X3
Manufacturer: Jimi IoT (Concox)
Forum Discussion

Number of units

Features Concox X3:
  • Blackbox
Supported in Wialon:
  • Remote management via GPRS
  • Remote management via SMS
  • Modification of the "speed" parameter
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Concox X3 unit properties section of Wialon GPS tracking software :

Device type: Concox X3
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox X3 for use in Wialon Hosting :

Server port: 21688

3366 units of Concox X3 device type are connected to Wialon Data Center. This represents 0.14% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm
41: Harsh Acceleration
42: Sharp Left Turn
43: Sharp Right Turn

48: Harsh Brake


Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mcc Mobile Country Code
mnc Mobile Network Code
lac Location Area Code
cell_id Cell Tower ID

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

gsm GSM signal strength degree
acc ACC Status. ACC low: 0, ACC high: 1 0-1

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*