Queclink GV200

Number of units

Features Queclink GV200:
  • Built-in odometer
Supported in Wialon:
  • ADC sensors
  • Garmin support
  • Remote management via GPRS
  • Digital sensors
  • LBS
  • Remote management via SMS
  • Communication via TCP

The following data should also be added to Queclink GV200 unit properties section of Wialon GPS tracking software :

Device type: Queclink GV200
Unique ID: imei

Specify the following parameters in configuration software or configuration Queclink GV200 for use in Wialon Hosting :

Server port: 20420

337 units of Queclink GV200 device type are connected to Wialon Data Center. This represents 0.01% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
pwr_ext The voltage of the external power supply V

The current motion state of device:

  • 16 - Tow
  • 1A - Fake Tow
  • 11 - Ignition Off Rest
  • 12 - Ignition Off Motion
  • 21 - Ignition On Rest
  • 22 - Ignition On Motion
  • 41 - Sensor Rest
  • 42 - Sensor Motion


External GPS antenna status:

  • 0 - is working
  • 1 - is detected in open circuit state
  • 3 - is in unknown state


Harsh behavior:

  • 0 - harsh braking behavior
  • 1 - harsh acceleration behavior


The speed level of which the harsh behavior is detected:

  • 0 - unknown speed
  • 1 - low speed
  • 2 - medium speed
  • 3 - high speed

gps_acc GPS accuracy
mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell tower ID
mileage Current mileage km
total_mileage Total mileage km
ign Ignition state: 0 - off, 1 - on
ign_off_duration Duration since last time the ignition is off s
ign_on_duration Duration since last time the ignition is on s
hour_meter_count The total hour meter count h
tempN The temperature sensor number N value °C
report_type The message type of ASCII format report

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*