GPS tracker Queclink GV65 | Integrated with Wialon

Features Queclink GV65:

Blackbox
GLONASS support

Supported in Wialon:

ADC sensors
Remote management via GPRS
Driver identification
Digital sensors
LBS
Remote management via SMS
Communication via TCP

Can be supported upon request:

SMS sending of data
Communication via UDP

The following data should also be added to Queclink GV65 unit properties section of Wialon GPS tracking software :

Device type:	Queclink GV65
Unique ID:	imei

Specify the following parameters in configuration software or configuration Queclink GV65 for use in Wialon Hosting :

Server port:

20980

1149 units of Queclink GV65 device type are connected to Wialon Data Center. This represents 0.05% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
battery	The current volume of the backup battery	%
call_number	The phone number of the incoming call which triggers the report message
curr_hour_meter	The current hour meter count	h
curr_mileage	The current mileage	km
ext_gps_ant	External GPS antenna status: 0 - is working 1 - is detected in open circuit state 3 - is in unknown state
fuel_level	The fuel level
gps_acc	GPS accuracy
gps_signal_status	GPS signal status: 0 - lost GPS signal or no successful GPS fix 1 - GPS signal recovered and successful GPS fix
harsh_behavior	Harsh behavior: 0 - harsh braking behavior 1 - harsh acceleration behavior
harsh_speed_level	The speed level of which the harsh behavior is detected: 0 - unknown speed 1 - low speed 2 - medium speed 3 - high speed
h_m_count	The total hour meter count	h
hour_meter_count	The total hour meter count	h
idling	The time that the vehicle has been in idling status	s
ign	Ignition state: 0 - off, 1 - on
ign_off_duration	Duration since last time the ignition is off	s
ign_on_duration	Duration since last time the ignition is on	s
input_id	ID of the input to which the fuel sensor is connected to, 0 means connected with serial port
inputN	The current logical status of the input port number N: 0 - is disable status 1 - is enable status
jamming_status	The current Jamming status of the device. 1 - quit the jamming 2 - enter the jamming
mileage	The total mileage	km
msg_type	The message ID of HEX format report
pwr_ext	The voltage of the external power supply	V
pwr_int	The voltage of the backup battery. The value of this field is only valid when the external power is not connected	V
report_type	The message type of ASCII format report
motion_state	The current motion state of device: 16 - Tow 1A - Fake Tow 11 - Ignition Off Rest 12 - Ignition Off Motion 21 - Ignition On Rest 22 - Ignition On Motion 41 - Sensor Rest 42 - Sensor Motion
tempN	The temperature sensor number N value	°C
total_hour_meter	The total hour meter count	h
total_mileage	The total mileage	km
csq_ber	CSQ Ber
charging	Charging
gnss_ant	External GNSS Antenna
iccid	ICCID
is_power_ext	External power supply
led_on	LED On

Parameter name

Description

Units

battery

The current volume of the backup battery

call_number

The phone number of the incoming call which triggers the report message

curr_hour_meter

The current hour meter count

curr_mileage

The current mileage

ext_gps_ant

External GPS antenna status:
0 - is working
1 - is detected in open circuit state
3 - is in unknown state

fuel_level

The fuel level

gps_acc

GPS accuracy

gps_signal_status

GPS signal status:
0 - lost GPS signal or no successful GPS fix
1 - GPS signal recovered and successful GPS fix

harsh_behavior

Harsh behavior:
0 - harsh braking behavior
1 - harsh acceleration behavior

harsh_speed_level

The speed level of which the harsh behavior is detected:
0 - unknown speed
1 - low speed
2 - medium speed
3 - high speed

h_m_count

The total hour meter count

hour_meter_count

The total hour meter count

idling

The time that the vehicle has been in idling status

ign

Ignition state: 0 - off, 1 - on

ign_off_duration

Duration since last time the ignition is off

ign_on_duration

Duration since last time the ignition is on

input_id

ID of the input to which the fuel sensor is connected to, 0 means connected with serial port

inputN

The current logical status of the input port number N:
0 - is disable status
1 - is enable status

jamming_status

The current Jamming status of the device.
1 - quit the jamming
2 - enter the jamming

mileage

The total mileage

msg_type

The message ID of HEX format report

pwr_ext

The voltage of the external power supply

pwr_int

The voltage of the backup battery. The value of this field is only valid when the external power is not connected

report_type

The message type of ASCII format report

motion_state

The current motion state of device:
16 - Tow
1A - Fake Tow
11 - Ignition Off Rest
12 - Ignition Off Motion
21 - Ignition On Rest
22 - Ignition On Motion
41 - Sensor Rest
42 - Sensor Motion

tempN

The temperature sensor number N value

°C

total_hour_meter

The total hour meter count

total_mileage

The total mileage

csq_ber

CSQ Ber

charging

Charging

gnss_ant