Asset GPS tracker Suntech ST730 (SigFox)

Features Suntech ST730 (SigFox):

Sigfox
Wi-Fi positioning

Supported in Wialon:

Communication via TCP

The following data should also be added to Suntech ST730 (SigFox) unit properties section of Wialon GPS tracking software :

Device type:	Suntech ST730 (SigFox)
Unique ID:	custom

Specify the following parameters in configuration software or configuration Suntech ST730 (SigFox) for use in Wialon Hosting :

Server port:

21508

24 units of Suntech ST730 (SigFox) device type are connected to Wialon Data Center. This represents 0.02% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
msg_type	Message type: 17 - Event - turn on 18 - Event - turn off 19 - Event - SOS button 20 - Event - Hall sensor triggered 21 - Event - Hall sensor absent 22 - Event - Movement 23 - Event - Starting battery charge 24 - Event - Stopped battery charge 25 - Event - Entering geofence 26 - Event - Leaving geofence 27 - Event - Entering Wi-Fi fence 28 - Event - Leaving Wi-Fi fence 29 - Event - GPS jammer 30 - Event - Low battery 31 - Free 32 - Tracking 48 - Status response 49 - Error 50 - Tracking configuration response 51 - Event configuration response 52 - GPS configuration response 53 - Download configuration response 54 - Fence configuration response
temp	Temperature
voltage	Battery voltage	V
battery	Battery level	%
wifi_mac	Wi-F Mac address
rssi	Received signal strenght indication
nic	Network Interface Card
ax	Accelerometer. X axis
ay	Accelerometer. Y axis
az	Accelerometer. Z axis
fence_num	Fence number
fw	FW version
track_period	Tracking period
track_fields	Tracking message data fields
evts_enabled	Events enabled
ttw_no_fix	Time to wake up the GPS before the tracking message, if there is no fix
ttw_fix	Time to wakeup the GPS before the tracking message, if there is fix
gps_state	bit 0 - GPS state between tracking messages if no fix bit 1 - GPS state between tracking messages if fix bit 2 - Wi-Fi backup
t_check_dw	Time in hours to check for downloads
dw_state	bit 0 - Force the message download, do not wait until next Tx bit 1 - Check for download every message,
fence_conf	Fence configuration

Suntech ST730 (SigFox) transmits data to SigFox platform. After that data are transmitted to Wialon. Please read the following document to make appropriate settings in SigFox platform: Instruction on configuring BATCH_URL and URL callbacks in SigFox platform

Fill out a request form to get started with Wialon